Electronics Forum | Thu May 19 02:04:36 EDT 2016 | jpcwg
Located in Shenzhen China, the Silicon Valley of hardware, ALLPCB.com is a company specialized and experienced in manufacturing printed circuit boards of prototyping and low volume production. Through the years thousands of business customers and eve
Electronics Forum | Wed Feb 27 15:14:52 EST 2008 | gregf912
Senior, below, is correct. THe narrow view camera has to be upgraded in order to place 0201 components. Also to pick the parts you need the 0201 feeders. These feeders present the part 0.3 mm higher than the standard 0402 feeder. The part pickup heig
Electronics Forum | Mon May 22 10:43:05 EDT 2000 | TMV
The SMT LAB at Universal Instruments Corp. has presented a paper entitled "Process parameters optimization for mass reflow of 02\01 components" at APEX 2000. If you weren't able to attend, an excerpt is available at www.UIC.com, under the AUTOMATION
Electronics Forum | Thu Jul 26 09:22:20 EDT 2001 | nwyatt
We are currently testing 0201s. We are using T3 paste, and it is working fine. You will need specialized feeders, test components, and test boards. Also depends what machines you are using - some are not capable of placing 0201 components. My s
Electronics Forum | Tue Sep 17 15:03:31 EDT 2002 | davef
Contact: * PCD Magazine [ http://www.pcdmag.com/mag/reprints.html ] and ask them to send you a reprint. * Jim Blankenhorn [ http://www.smtplus.com ] and ask him to send you a reprint. Or try: * �Assembly And Interconnect Reliability Of BGA Assembled
Electronics Forum | Wed Jun 02 18:28:17 EDT 2004 | russ
I would look at the Samsung CP40 or 45. They have the placement rates you want even a little better on the 40. the 45 will double that easily. They handle all types of parts down to 0201 components. Depending on the camera you select (25mm) you ca
Electronics Forum | Tue Jun 06 12:27:11 EDT 2006 | flipit
Are you using 08MPF nozzles with front lighting? If so, these nozzles wear quickly if you place a lot of chip caps and resistors. I was using the 3500 vision system and found the vision recognized the nozzle once it was worn and became shiny. You
Electronics Forum | Wed Sep 17 05:41:16 EDT 2008 | ralphspm
Can Fuji machines such as IP1 and IP2 utilise 2mm pitch feeders provided by Hover-Davis? Has anyone used them on an IP1 or IP2, and if so were they effecient? Does anyone have 2mm pitch feeders that utilise an Fuji IP1/IP2, for sale? We are currently
Electronics Forum | Fri Jan 06 05:03:11 EST 2012 | richieoreilly
Hi All, Just wondering if anyone is placing 0201 components in volume. If so What pad layout are you using, i.e. pad size, shape and spacing. Also are you pads and fiducials solder mask defined or copper defined. Can you also let me know the rough q
Electronics Forum | Thu Mar 01 16:39:29 EST 2012 | triadelectronics
Our company is going to attempt to place 0201 components using our Fuji CP4-3 with the upgraded SMD3 vision system. Count On Tools is providing the 0.4 mm nozzles and we are using our 8mmX2mm feeders with the 0.7mm tape leaf (if it works at all we w