Electronics Forum | Mon Jan 19 09:07:45 EST 2015 | cotinc01
We can offer several nozzles to assist with the placement of 0402/0201 components in the four-spindle head. We offer the 06MPF along with custom ceramic tipped nozzles. Most of our standard nozzles for this head type are less than $125.00 each. Chec
Electronics Forum | Tue Jun 26 15:27:14 EDT 2018 | Dex
Why would we change? our fuji equipment was previously owned by Motorola and have many hours on them. we struggle to place 0402 components and the vision system on the CP seems to be one foot in the grave. The machines are tired and have been ran har
Electronics Forum | Thu Mar 05 12:58:01 EST 2020 | joeljacobo
Hi everyone, I hope you can help me with this matter. We have a Hanwha SM482 machine and a series of projects involving many 0201 components (resistors, capacitors, inductors, etc.) will be carried out. Making the prototypes I noticed that there is
Electronics Forum | Tue Sep 18 11:34:36 EDT 2001 | jschake
The tightest spacing between neighboring 0201 components assembled was 8-mils. Please refer to the response for the query entitled �Minimizing Tombstoning Defects� posted by martys, as the response provided there is also relevant to address this que
Electronics Forum | Fri May 24 11:49:55 EDT 2002 | stefwitt
Again, I would like to refer to the tape dimensions and their deviations. In an 8 mm tape the distance from the sprocket holes to the tape pocket is 3.5 mm +/- 0.05 mm. This tolerance is easy to achieve, because in the manufacturing process of the ta
Electronics Forum | Tue Sep 02 15:35:55 EDT 2008 | modernprecison
I have a Siemens S-27 and I'm having occasional issues with 0201 components in particular. I'm using the 12 segment head and 902 nozzles with them. I'm making sure the magnet is clean of debris and the feeder is sitting flat. Most of the time they
Electronics Forum | Thu May 05 01:50:44 EDT 2016 | darby
Dear Forumites, It's been a while, but I have a question. I was recently asked to provide a scenario on capacity if we retired two older lines and replaced with a new line. My capacity figures were based on real time production over a period of six
Electronics Forum | Thu Sep 28 15:57:49 EDT 2000 | Chris
Donna, Please email me at nolefthere@yahoo.com and I will give you my work #. I would like to talk to you on this subject. I have been placing 0402s with a Contact 3AV machine since Nov 96. I have too many suggestions and comments to tell you her
Electronics Forum | Tue Sep 14 10:25:37 EDT 1999 | Earl Moon
| I'm hoping to use 0201 caps and resistors in a new design but so far have only found one company who makes such small devices (Murato). | | Can anyone direct me to any other supplier? | | Are there any particular problems associated with using s
Electronics Forum | Wed Sep 10 07:42:52 EDT 2008 | lloyd
Can you provide a bit more info on your machine setup. I not full fimilar with the S-27 so a few points may not be relevant to your machine. Are you using Siplace Pro. Are you using the standard GF for the 0201 component. Do you have the component
