Electronics Forum | Thu Aug 16 08:08:11 EDT 2001 | forrge
Looking for feedback from people that used the Fuji CP6 to place 0201 parts. Is the CP642 reliable? I have been told that the Fuji CP642 cannot reliably place the 0201's and the CP643 must be used.
Electronics Forum | Fri Feb 15 15:50:55 EST 2002 | Bruce
The CP-642 simply requires a camera upgrade for 0201 parts. This is the same camera as is used on the CP-643. You should then get identical results
Electronics Forum | Tue Mar 17 16:56:45 EDT 2009 | gregf912
Sorry Keith but is not possible to place 0201 parts on the CP43 machine. THe XY table is not tight enough on the resolution or the Z height. The parts camera will not be able to tell the part from the nozzle. THe CP6-4000 machine can not do 0201 part
Electronics Forum | Tue Feb 19 09:19:01 EST 2002 | Kent
We have been placing 0201 in our production using both CP642 and CP643 since last year. But it was necessary to upgraded a narrow view camera to recognize 0201 for CP642. Since then, the placement of 0201 is really reliable.
Electronics Forum | Mon Sep 13 17:39:02 EDT 2021 | duchoang
Agree. The big pad and part nearby made the paste on two ends of cap melted unevenly.Deposit more paste on the tombstone-ed pad will make it easier to melt. Nothing wrong with profile if everything else is OK. BTW, how to measure temperature on two e
Electronics Forum | Fri Feb 21 14:20:56 EST 2003 | jseagle
Has anyone actually seen 0402 or 0201 part with the value on it? I haven't. So what would be the big deal if these parts are placed upside down. The only difference I have noticed is usually on a resistor one side is black and the other is white an
Electronics Forum | Wed May 17 17:52:12 EDT 2006 | FredC
I had reason to check the Tyco web site today and on their home page was a very prominent sp? ad for feeders capable of handling 0201 parts. You mentioned that the ones from Tyco worked well, maybe they are back in stock. I talked to the customer
Electronics Forum | Fri Feb 22 09:10:51 EST 2008 | mulder0990
AJ, You can use 0402 feeders to place the 0201 parts. I would suggest getting the feeders you are going to use calibrated before trying to run the parts. Also, another good idea is to get some 0.4mm tape leaf covers for the feeders. They will h
Electronics Forum | Thu Aug 13 00:18:28 EDT 2015 | Banana
hi, currently we have Fuji CP8 and XP242 machine for pick and place. as now, most of the customers are going for the 0201 components, so i would like to know does the CP8 has the capability to mount 0201. because, i had run 1 model that has 0201 part
Electronics Forum | Fri Apr 14 09:04:15 EDT 2023 | smtusa
Has anyone run 0201 parts on mydata my9e/12e/etc series with hydra extended range head? Is it as reliable/quick as 0402? As our boards are shrinking would love to run 0201 on everything if not a headache; scared of putting myself into danger zone.
