Electronics Forum | Tue Apr 17 17:30:09 EDT 2007 | jaimebc
Our experience with leaded paste and SAC305, for 0402's, has been positive with the following stencil designs: 1.- 5 mil thickness. 2.- Home plate design. Hope it helps.
Electronics Forum | Thu Apr 12 09:13:41 EDT 2007 | aj
Hi all, What stencil aperture designs do you use for 0402 components? Thanks in advance for replies. aj...
Electronics Forum | Wed Apr 18 09:31:24 EDT 2007 | aj
Hi, Can you advise the footprint dimensions used on the PCB ? Thanks, aj...
Electronics Forum | Tue Feb 04 17:24:07 EST 2003 | jonfox
we have some pretty tight 0402 placements and our best fix was to reduce the pad (vertically speaking) from .030x.022 to .020x.022. Fewer tombstones and the paste flows out to the edge of the pads nicely. Only difference is that we have a 6mil sten
Electronics Forum | Wed Feb 05 14:20:45 EST 2003 | Stephen
One thing that worked for me was simply rounding off the pads, making square pads into circlesfor the stencil. It worked but did seem a little strange turning squares into circles for 0603's and 0402's and turning cirlces for BGA's into squares, (bu
Electronics Forum | Wed Feb 05 21:24:35 EST 2003 | davef
Stephen's correct. Radiased outer corners on 0402 pads really do seem to improve things. We aim to try "squared-up semicircles".
Electronics Forum | Sat Apr 21 21:02:30 EDT 2007 | mika
Yes we can (at least show something that work for us) but hey, not possible to attach some pictures here... We don't have any problem with 0402:s on OK Corral... / Ps. Just get up mischief. Ds.
Electronics Forum | Sat Apr 14 04:33:44 EDT 2007 | aj
the footprint is IPC standard which I have found to be less forgiving than the Jedec one for tombstoning. Enig finish - 5 thou stencil. We have historically used homeplate design but I am leaning towards 1:1. Leadfree application. aj...
Electronics Forum | Wed Feb 05 10:23:26 EST 2003 | russ
Are these the only packages that you could come up with Dave? What about all the rest? You're something else. Thanks for doing my work for me! Russ
Electronics Forum | Wed Apr 25 16:33:09 EDT 2007 | aj
Hi All, Thanks for all the replies. I went with 1:1 (ENIG Finish) and the results were very good. aj...
