Electronics Forum | Tue Feb 04 17:24:07 EST 2003 | jonfox
we have some pretty tight 0402 placements and our best fix was to reduce the pad (vertically speaking) from .030x.022 to .020x.022. Fewer tombstones and the paste flows out to the edge of the pads nicely. Only difference is that we have a 6mil sten
Electronics Forum | Wed Feb 05 14:20:45 EST 2003 | Stephen
One thing that worked for me was simply rounding off the pads, making square pads into circlesfor the stencil. It worked but did seem a little strange turning squares into circles for 0603's and 0402's and turning cirlces for BGA's into squares, (bu
Electronics Forum | Wed Feb 05 21:24:35 EST 2003 | davef
Stephen's correct. Radiased outer corners on 0402 pads really do seem to improve things. We aim to try "squared-up semicircles".
Electronics Forum | Wed Feb 05 10:23:26 EST 2003 | russ
Are these the only packages that you could come up with Dave? What about all the rest? You're something else. Thanks for doing my work for me! Russ
Electronics Forum | Tue Feb 04 09:03:45 EST 2003 | Russ Roberts
Greetings, I am pretty new to SMT production, and have learned much from this forum. I am getting ready to build a CCA with many 0402 parts that are really close together. I consider these fine pitch. The board also has two QFPS, so my stencil design
Electronics Forum | Wed Feb 05 13:56:40 EST 2003 | davef
I figure if you need the rest, you don't need these. These strips are from some laser cutting tool fabricator. They give them to their customers [laser cut stencil fabricators] so the customer can do a good job. Yall have a nice day now, y'hear?
Electronics Forum | Tue Feb 04 22:28:16 EST 2003 | davef
You could reduce the paste by about 70%. Solder balling and tombstoning will be the issues to fight. The drivers to these don't change with the component size. Use the fine SMTnet Archives for background. Aperture Size and Thickness of Solder Pas
Electronics Forum | Thu Oct 30 15:07:40 EDT 2008 | jemills
Hello I have a new 0402 pad design on a recent board were building in future. On closer look i thought the pad was a thru hole mount , but upon closer inspection the round pads are for 0402 comps. I had a discussion with the engineer and he said
Electronics Forum | Fri Oct 31 07:52:23 EDT 2008 | davef
For a better understanding of decoupling capacitors, look here: * http://en.wikipedia.org/wiki/Decoupling_capacitor * http://www.hottconsultants.com/techtips/decoupling.html * http://pcdandf.com/cms/content/view/3410/95/
Electronics Forum | Thu Oct 30 15:36:18 EDT 2008 | grantp
Hi, Sounds like your engineer does not know what he's doing. We have developed and built hundreds of thousands of boards with normal square pads for 0402, and we just use a 5 thou stencil with 5% reduction and it works well. Decoupling? What is tha
