Electronics Forum | Mon Jan 14 15:41:41 EST 2002 | gdstanton
MyData packages may be exported in ASCII format with a 3 1/2" floppy. Select Utility, Export, Package, DOS-Diskette, Choose Single or ALL packages, Select Package with Data. The resulting file should look something like this: # *** PACKAGES *** P00
Electronics Forum | Fri Feb 14 17:25:17 EST 2003 | mikeo
Hello, As an Ex-Sanyo engineer I agree with the previous reply. Use EP1 sparingly. You may find that the nozzle sleeves are scored when you remove them. This is from lack of cleaning. You can only buy the sleeve and bearing from sanyo which is a was
Electronics Forum | Wed Apr 10 22:23:48 EDT 2002 | davef
IPC-6012A, 3.4.1 has words to the effect of: Hole size tolerance and hole pattern accuracy shall be as specified in the procurement documentation. Our fab says: Standard Drill Sizes Drill Number ||Hole Size ||Finished Hole Size 70 ||0.028" ||0.02
Electronics Forum | Wed Apr 10 22:24:30 EDT 2002 | davef
IPC-6012A, 3.4.1 has words to the effect of: Hole size tolerance and hole pattern accuracy shall be as specified in the procurement documentation. Our fab says: Standard Drill Sizes Drill Number ||Hole Size ||Finished Hole Size 70 ||0.028" ||0.02
Electronics Forum | Fri Oct 03 09:00:18 EDT 2003 | davef
EIA standard packages have a variety of L/W proportions. EIA||Dimension mm (LXW)||Proportion (L/W) 0201||0.6X0.3||2 0202||0.5X0.5||1 0303||0.8X0.8||1 0402||1.0X0.5||2 0504||1.25X1.0||1.25 ||1.4X1.4||1 0603||1.6X0.8||2 0805||2.0X1.25||1.6 1111||2.8X2
Electronics Forum | Wed Aug 29 11:22:11 EDT 2007 | gmoritz
Thank you for the answers to my questions. We are running two-lead LED insertions. Most of our PCBs are square between 9" and 14.25" in a 16 x 16 array, so pitch ranges from 0.52" to 0.90". Further complications are that most of the boards have th
Electronics Forum | Wed Oct 07 15:46:36 EDT 2020 | tamasmagyar
Hi Hearse, I currently use a MY600, with a AG Ejector which can place dots between 0.33 and 0.52 mm. The differences for a MY600 with placing small dots is down to ejector and paste. To be able to place dots as small as 0.25 mm, you would need an
Electronics Forum | Thu Nov 30 21:13:55 EST 2000 | Dave F
Can't find "WS601" on the Alpha site. What is that stuff? So, with nothing to go on, I'll just guess ... Yer probably cold welding the solder particles together. The nozzle size (inside diameter) determines the dot size. * With glue, small dot si
| 1 |
winsouce.jpg)
