Electronics Forum | Sat Jul 16 08:12:44 EDT 2005 | davef
skandaae: By "tilt" do you mean that one end of the 0603 has lifted from the board surface? If so, we call this "tombstone". In general, tombstoning is caused by an imbalance in temperature or forces on the component. * Convince yourself about the
Electronics Forum | Tue Oct 12 15:20:44 EDT 1999 | Jim Schultz
I need your help! We have been doing double sided surface mount for 4 years now. Up until 6 months ago I have not had a tombstoning problem. Since then I have a fairly high incidence rate of tombstones on the 0603 size resistors (no other parts).
Electronics Forum | Thu Apr 24 23:04:45 EDT 2003 | yukim
I've been struggling with this problem for a while. We have two products: A, which is Ok and B, with tombstone defect (0603 & 0805 capacitor chips). A & B have the same design: pad sizes, separation between pads, components orientation. Both have s
Electronics Forum | Wed Apr 09 17:39:30 EDT 2008 | diesel_1t
Hi. I know that this is one of the mos common threads here, I have been doing some research, but i didn't find any similar. The main issue is that I have seen tombstoning since two weeks ago, it is more characteristic on 0603 resistors (Stackpole e
Electronics Forum | Thu Sep 11 20:32:08 EDT 2008 | diesel_1t
I know that most of the problems are called solder issues, this is why i put "solder related" quoted because i have seen more than usual "solderability issues" posted on this forum lately. I had a tombstoning issues with 0603 resistors, on some mat
Electronics Forum | Tue Sep 14 13:27:57 EDT 1999 | Scott S. Snider
| Can anyone out there pls enlighten me on how to solve chip tombstone defects. | I am running a board with a lot of 0603 chip. i had fine the profile and the alignment, but it still happen randomly on the board itself. Is there any other way to sol
Electronics Forum | Fri Sep 09 09:58:54 EDT 2005 | gregcr
Hi all, we are placing some of the 0306's (0603 size parts with the contacts down the long side of the part rather than on the ends). We are having quite a lot of tombstoning. The placement is dead on and the pad layout is per the mfg specs'. Any
Electronics Forum | Tue Oct 12 16:08:44 EDT 1999 | Brian
| I need your help! We have been doing double sided surface mount for 4 years now. Up until 6 months ago I have not had a tombstoning problem. Since then I have a fairly high incidence rate of tombstones on the 0603 size resistors (no other parts).
Electronics Forum | Sun Sep 11 05:48:32 EDT 2005 | Mika
If 0 or 180 degr. make v-shape openings to each other left & riht, if 90 or 270 degr. top/ bottom, on the stencil apertures; well, you understand... We use this and 87 % reduction of stencil apertures for 0603:s and 0402:s. 0.127 mm stencil thicknes
Electronics Forum | Mon Apr 14 19:26:35 EDT 2008 | diesel_1t
Update: Recently, we ran a (old) product on which they made a new stencil, appertures 1-1 on 0603. As soon as they began to run, tombstones appear. I went to trashcan to rescue old stencil, and noticed that pads came with a "c" shape reduction, I as