Electronics Forum | Thu Jul 22 11:55:55 EDT 1999 | jseagle
I am looking for some recommendations for a cleaner for rosin flux. James
Electronics Forum | Fri Jul 23 14:13:48 EDT 1999 | Bill Schreiber
Dear James, What is your application? Are you cleaning PCBs, pallets, tooling, etc? Is the flux pre or post solder? Bill Schreiber | I am looking for some recommendations for a cleaner for rosin flux. | | James |
Electronics Forum | Mon Jul 26 16:50:12 EDT 1999 | Bill Schreiber
If you were cleaning pallets, BTU air amplifiers or other tooling, I could provide some recomendations. However, we are not involved with the post solder cleaning of PCBs. Sorry. Regards, Bill Schreiber | I guess I wasn't too specific. We current
Electronics Forum | Thu Jul 22 14:44:30 EDT 1999 | Scott McKee
| I am looking for some recommendations for a cleaner for rosin flux. | | James | Popular is an Organic Saponifier Cleaner from Alphametals, the name is 2110. Requires a 5%-7% mix ratio with DI water. IPA is also used but is getting on the "no n
Electronics Forum | Wed Aug 13 11:06:01 EDT 2003 | bremerg
I work for a avonics company and the decesion by the company is that we will move over to LF kicking and screaming. They did the same when I took the 1,1,1,Trichlorethene away due to government regulations. Be carefull when any governmental organiz
Electronics Forum | Mon Oct 26 20:04:23 EST 1998 | Dave F
| Hi, | | My question is how close can you place smd 0603 chip resistors to each other with having an assembly problem? | I know the pick and place machines don't need a lot of clearance, Iam more concerned about the court yard area around the com
Electronics Forum | Thu Nov 09 13:26:08 EST 2000 | omar_verdugo
Somebody can help me with this problem.I already have installed the version of fujicam 1.2 but the machine interface that come with this don't work propertly this have a little problem with the rotation of theta is not the same with the theta assingn
Electronics Forum | Tue Jan 30 07:29:21 EST 2018 | charliedci
I believe the correct statement (I've been told) is "the process is no clean". The solder paste is "low residue". As a CM, in the past we had customers that insisted on a wash after soldering. We used DI water with a saponifier which had mixed result
Electronics Forum | Thu Jul 22 16:36:06 EDT 1999 | Mike Konrad
Scott is right, Alpha' 2110 is a good saponifier (be careful though as it can dull your leads). Saponifiers in general are better if used in an aggressive spray-in-air system. Low agitation immersion systems (heated baths or refurbished vapor degre
Electronics Forum | Thu Jan 14 22:59:08 EST 1999 | Chris G.
I get white residue on my PCBs after vapor degreasing. No comments on the vapor degreaser. Yes, I still use one of these. I use a vapor degreaser and a 1,1,1 replacement solvent due to the quick clean and quick dry times. Anyway, I only get white