Electronics Forum | Wed May 20 07:51:42 EDT 2009 | Jeff
We have a GSM1 with version 1.4. The machine has the old VME chassis. So to upgrade the software (to use enhanced component setup) the VME chassis has to be upgraded. We had UIC in last year to look at this and they would upgrade the VME and software
Electronics Forum | Thu Nov 19 20:05:14 EST 2009 | davef
Density. There is a difference between lead (.410 lbs. per cubic inch) and tin (.254 lbs. per cubic inch). The same volume of tin-based solder, therefore, weighs approximately 1/4 less than a lead-based material. This adds up to more joints per pound
Electronics Forum | Fri Apr 02 04:02:18 EDT 2010 | manju2cool
Hi, I think concept of inspection through AOI is changing. I am struck in confusion.Because some manufacturer say 3D inspection, with 1+4 cameras is ultimate solution. Orbotech also came with 13 cameras at once!Now some say, all these are eyewashing
Electronics Forum | Wed Mar 13 11:03:59 EDT 2013 | marcelorotofrance
Despite this machine is an obsolete dynosaur, almost 1/4 century old, is (was) a reliable work horse. Now is broken. Just after first reset the screen shows an error message "1420 XY INTERLOCK". The message clears with RESET. When I push ORG button
Electronics Forum | Wed Jan 15 21:55:41 EST 2014 | padawanlinuxero
we do that and there's a variation on the solder temp. sometimes around 10 degrees, we have 2 solder pallets that are run in intervals of roughly 3 1/2 minutes a part (the time that take the operator to put all 3 terminals in a 42 pcbs per board, and
Electronics Forum | Mon Sep 28 09:29:13 EDT 2015 | proceng1
We have an OLD ABW 1208 reflow oven. The hard drive died this morning. The software disk I have is a 5 1/4 floppy. I'm looking at having to get a new computer, and if I do, I'll need to reload the software. I don't think I'll be able to use the f
Electronics Forum | Mon Sep 30 18:16:36 EDT 2019 | slthomas
I'm beginning to think that the screws "just aren't made like they used to be". That said, if the description of the bit is just PH0, PH00, "standard" or "high torque" without providing geometry (same thing goes for the screws), it's nearly impossi
Electronics Forum | Tue Feb 18 20:04:38 EST 2020 | SMTA-Alex
Sebas, some things in your profile don't make sense. 3 of your thermocouples, #1 # 4 and #6 are consistent. The others show completely different data. The consistent thermocouples, also, show peak temp at 241 - 243 degrees. That is extermely high for
Electronics Forum | Thu Mar 05 07:40:55 EST 2020 | tomdegas
I swapped the mi boards with ones from a working My12 machine and the same results. To recap my problem: On "Hardware Initialization" the center jaws open and close, the Hydra Theta belt moves back and forth, the Hydra head moves all the way down an
Electronics Forum | Tue Feb 09 12:30:37 EST 2021 | jzeivel
I am quoting a new job and am wondering if I should use carrier pallets for it. There are 2 PCBAs both are 31mil thick. One is about 16 inches long, and the other about 13 inches long. Both are 1.4 inches wide. I was thinking to put them in a 2 u
