Electronics Forum | Thu Apr 15 18:21:23 EDT 1999 | Jeff Sanchez
| OK, this is it. This is the reason, root cause, and all that other technical stuff. Only thing is, it ain't technical. | | 1) I hate registering for anything | 2) I hate being cooped up | 3) I want freedom | 4) This ain't no 60's thing | 5) I'm n
Electronics Forum | Fri Apr 16 12:05:58 EDT 1999 | Wade Oberle
| I've just come back from Nepcon West and I'm just as confused about AOI as when I left. Is anyone out there really happy with their equipment and getting the results they expected? I would like to know about programming time and equipment reliabili
Electronics Forum | Wed Apr 14 10:53:49 EDT 1999 | Jason Gregory
Jeff, my experience with both turret-style placement machines and split-axis type machines is that the turret-style generates a higher placement rate than that of a split-axis style. The fact that the axes are integrated under a fixed placement site
Electronics Forum | Fri Apr 16 01:19:10 EDT 1999 | Wiratsr
Hi Jeff, I didn't have experience with Pansert MV2-E, but I have MV2-F. The machine running in high speed, but very noisy. I have other machine Sanyo TCM-3000 Same speed with MV2-F. Sanyo is original design turret system, a stable mounting machine,
Electronics Forum | Mon Apr 19 02:45:31 EDT 1999 | Brian Sloth Bentzen
| | We process both tin/lead plated boards and gold plated boards in our surface mount group. I have used Sn62/Pb36/Ag2 solder paste on all gold plated boards to help prevent gold scavaging. To reduce the amount of different solder pastes we have t
Electronics Forum | Fri Apr 02 02:01:24 EST 1999 | P.L. Sorenson - Technical Consultant
| | | Has anyone heard of a problem with catastrophic failure of | | | large value (200uF) solid tantulum capacitors that have been | | | exsposed to high humdity. | | | | | I suppose that with water moisture seep in the capacitor, the risk is ver
Electronics Forum | Thu Mar 25 16:10:31 EST 1999 | Chrys Shea
| I have not been good at this and I assume others have not either, so I figure I'll mouth-off about it, even though I'm probably the only jerk on SMTnet that doesn't visit SMTnet Banner Advertisers. | | I believe that we need to visit SMTnet Banne
Electronics Forum | Tue Mar 23 10:16:22 EST 1999 | Chrys Shea
| Hi Folks, | This is my first surface mount board, so I asked our assembly house for some tips. They said only passives on the bottom side-preferably no smaller than 0805, 0603 only if I have to. I would think that an SOT-23 would be OK on the botto
Electronics Forum | Thu Apr 01 03:04:22 EST 1999 | Scott Davies
Dave, Thanks for the interest. Basically, we looked at this project as a straight swap, i.e. printing the glue on the PCB using a Dek screen printer instead of our current method of dispensing glue using a Camalot dispensing machine. For the PCB we
Electronics Forum | Sat Mar 13 14:39:01 EST 1999 | Earl Moon
Finished profiling this morning for a particularly obstinate board. Couldn't raise the nozzle as many of you suggest, and SRT promotes, because of dense population around every associated rework part. However, we did get good removes (TC'd and verifi