Electronics Forum | Tue Nov 06 16:20:52 EST 2007 | jmelson
Mostly, you don't want to do that. Whoever designed the PCB should be able to produce a "pick and place report" or similar file that lists components by designator (R123) component value/type (100 Ohm 0805) and XY and rotation. If there's absolutel
Electronics Forum | Tue Oct 05 16:02:04 EDT 2004 | Bryce
I am curious if anyone can help explain to me the cause of an effect we are seeing with some failed caps. The parts have been found to be cracked and in most cases are hard failures (capacitance well out of spec and DCR less than 100 ohm or shorted)
Electronics Forum | Tue Feb 16 14:04:10 EST 2016 | tsvetan
We are designing board which have to plug in M.2 connector and thickness is limited to 0.8 mm The board is very complex with many BGAs and DDR3 memory chips and we will need 6 layers for routing. The problem is that we will need signals with 50, 90
Electronics Forum | Wed Jan 09 20:40:58 EST 2002 | ianchan
Since we are on the topic, What we do over here, is to get SMT Technical to machine pick&place "sample component layouts" onto double-sided tape, which in turn is placed onto an actual PCB... QA will take that double-sided tape sample, and using an
Electronics Forum | Wed Jul 12 17:05:22 EDT 2017 | rodrigo
Hi all, Our Fuji cp6 woke up with a bad power supply (ps) this morning. The ps is one of two 24vdc (Corsel P300E-24). There is one inside the cabinet and one on the door where the cpu card is. The bad one is the one inside the cabinet. So we had anot
| 1 |
winsouce.jpg)
.gif)
