Electronics Forum | Wed Dec 14 08:46:58 EST 2011 | cbroegger
Hi, we use some camera based readers, they can scan all barcodes in a square of roughly 10 x 10 inches. We have some pcbs with 3-4 barcodes (linear, 2D barcodes), and it can read them all in one take. I can find more information if you need that.
Electronics Forum | Fri Dec 02 09:51:05 EST 2005 | whippingpost
I have an assembly that uses several different BGA packages. During troubleshooting we have found that some of the balls in the corners of the BGA's are separated from the underside of the package. The PWA is approx 10�x10� and the components vary fr
Electronics Forum | Thu Feb 17 22:30:09 EST 2000 | Dave F
Alberto: There's no rules, but it works sorta like this: RESISTORS Usually marked in ohms using a standard code: First two numbers is the value Third number is the multiplier 102 = 1.0 x 10� ohm = 1000 ohm = 1 kW CAPACITOR Usually not marked. When
Electronics Forum | Thu Feb 17 22:30:09 EST 2000 | Dave F
Alberto: There's no rules, but it works sorta like this: RESISTORS Usually marked in ohms using a standard code: First two numbers is the value Third number is the multiplier 102 = 1.0 x 10� ohm = 1000 ohm = 1 kW CAPACITOR Usually not marked. When
Electronics Forum | Mon Apr 07 14:03:27 EDT 2003 | ksfacinelli
We have a client we would like to have switch from leaded can components to surface mount versions. We currently are utilizing these on a number of designs but his concern is in the area of reliability of the solder interface. The caps generally ha
Electronics Forum | Fri Dec 08 19:02:12 EST 2023 | madisreivik
Found the main problem During messing around (hopelessly :) we had found the calibration menu and pressed "check". Machine thought that there was a calibration nozzle (maybe 10x10mm square) but in reality, there was d=1.0mm nozzle. Machine decided
Electronics Forum | Thu Aug 26 13:09:08 EDT 1999 | Doug
I am building a board with T1/34 LED's in a 10X10 array there are 12 arrays in a panel. The LED's are body to body in the array, .1 spaced. The LEDS have been autoinserted on a Universal RAD III, so they are cut and clinched. The trouble I am having
Electronics Forum | Mon Aug 30 16:14:58 EDT 1999 | Dave F
| I am building a board with T1/34 LED's in a 10X10 array there are 12 arrays in a panel. The LED's are body to body in the array, .1 spaced. The LEDS have been autoinserted on a Universal RAD III, so they are cut and clinched. The trouble I am havin
Electronics Forum | Fri Jun 19 19:11:34 EDT 1998 | Earl Moon
| I'm hoping someone out there can let me know who manufactures ceramic PCBs or boards made of another material that can withstand 400C for an extented period of time. The board is approximately 8"x16". | Thanks! The world's most complex ceramic cir
Electronics Forum | Mon Feb 03 22:48:00 EST 2003 | vinesh
Hi all, We are using small CSPs (10x10mm) in one of our products which has a big ground pad in the center (7x7mm). The maximum voiding allowed on this big pad is also no greater than 25% which we are finding very hard to achieve. The centre pad ha
