Electronics Forum | Fri Apr 29 09:08:45 EDT 2005 | davef
We call this the "orange stick test", but who's coloring? In preforming the test, you're supposed to use a light touch. Unfortunately, it's difficult to calibrate a "light touch." So, operators often end-up using too much force when probing or usi
Electronics Forum | Fri Apr 29 13:29:41 EDT 2005 | russ
I have always been nervous with this process. I fear that the "good joints" may become fractured without coming loose. I am a proponent of this to verify a profile or something to see the strength but then we always reflow the affected joint afterw
Electronics Forum | Thu Feb 15 17:07:34 EST 2007 | flipit
Oh by the way. I did not have the green lighting. I had standard incandescent lighting.
Electronics Forum | Thu Apr 07 10:39:36 EDT 2005 | geb
I have a BTU International VIP98 reflow oven, running WINCON Version 2.00C on Windows 98. The light tower only lights green when the oven reaches temperature, and the other colours never light up. Do you know how to set the other colour lights to tu
Electronics Forum | Tue May 28 12:56:22 EDT 2019 | dekhead
It is a communications failure between the CPU and the Cognex card. Does comms initiate between the 2 cards (flashing green on both)? or does it immediately come up red LED on Cognex? Have you reseated the CPU board as well as the Cognex? Is this a s
Electronics Forum | Tue Jul 22 03:37:18 EDT 2014 | serkanxy
Please us OK/NG light. This is advace light.Especially when there are 402 black resistors and they are on dark green or balck pcb, this ligt is perfect. But, this is optional thing. You must contact with local distributor to activate this ligt.
Electronics Forum | Wed Nov 23 09:22:16 EST 2016 | hloranzo
on the quad Qsv1 plus the z1 board has a amber light not green ,,, swap the z2 board and still amber light help please
Electronics Forum | Wed Nov 23 10:02:57 EST 2016 | hloranzo
on the quad Qsv1 plus the z1 board has a amber light not green ,,, swap the z2 board and still amber light help please gantry Z1 movement failure
Electronics Forum | Thu Aug 04 21:51:45 EDT 2022 | ttheis
When I press the green start-cycle button the 42V=E light illuminates but the 24V=E light does not. Could this be related?
Electronics Forum | Thu Feb 14 17:00:42 EST 2013 | richardc
I am trying to use Mydata TM8C feeders that work fine on a TP93 running 1.6.18 TPsys but are not recognized by a TP94 machine running 1.4.7 TPsys. I get a green flashing light instead of a solid green. I can initialize the hardware but can not proc
