Electronics Forum | Tue Nov 19 12:34:33 EST 2013 | jimmyboz
I am not trying to be critical but, you didn't even say Fuji CP-6 problem. There are CP-6, CP-642, and CP-643 machines, are asking 2 model as 642? Anyway, slow the cam speed down in the proper to 40 or 50%. If the problem goes away check the mainte
Electronics Forum | Sat Jan 21 19:44:07 EST 2006 | vincent
i have a problem similar to Daxman where cp6 usually having problem when it run at high speed, the head seems to have problem returning back to its origin at st12 and stop at st15 and st19 for nozzle change error, when rotating the head by hand, some
Electronics Forum | Mon Oct 21 09:41:42 EDT 2019 | mendezt6
Update: -The A12 tools will install in the 2nd machine. -Modified an A12 tool to install in the A13 tool location. -The modified tool will install in the A13 location of the 2nd machine, but not the 1st machine. Check that the parameters o
Electronics Forum | Fri Jan 20 05:53:23 EST 2006 | dougs
i think it's more likely to be greasy/dirty shaft clutches, stand at the front of the machine and use the cam handle to turn the cam, while your doing this push up gently on the black top section of the shaft and try to turn the shaft, it shouldn't r
Electronics Forum | Tue Aug 27 17:08:12 EDT 2019 | bazzah83
Hello, I am looking for a new desktop AOI machine which is able to verify a 1st off/master board. This means capture the image of the 1st board and add the placement list file to it, then use the software to check each part to its location on the boa
Electronics Forum | Fri Apr 16 17:44:40 EDT 2010 | rodrigo
We're still trying to fix a C-axis overflow error in our CP-65. I was swapping servo boards and one of them started to blinks a 2 on the LED single digit display and the machine didn't boot up. I replaced the servo board with a spare we bought on eba
Electronics Forum | Mon Dec 01 02:54:05 EST 2014 | divia
Yes nano coating giving the good printing, but the stencil tension is very important for the life, 1st ensure the stencil tension...
Electronics Forum | Wed Jun 25 10:29:32 EDT 2003 | caldon
Hey Mike- We ran into the same thing when we purchased a Large CanadianManufacturers repair business. We were creative and first used an ESD bag cut open (Simulate the paper idea) then we used a 3M parts bin and would tip it on its corner to funnel t
Electronics Forum | Wed May 03 11:12:08 EDT 2006 | samir
Iron huh? You sure about that? We have the ERSA Versaflows and our nozzles are made out of ST37 Tool Steel. There is an "American equivalent" to this grade but I forgot what it is. You'll have to google it like I did. Anywho, Tin or Tin-Lead sold
Electronics Forum | Fri Dec 08 19:10:29 EST 2000 | Dave F
Try these guys, they do more environmental ovens than your momma!!! LR Environmental 12902 S.Spring St Los Angeles CA 90061 800.574.2748 213.770.0634 fax0105 sales@lre.com www.lre.com John Kline
