Electronics Forum | Thu Jul 22 07:30:21 EDT 2010 | nitronica1
does anyone know where I can get replacement conveyor/drive belts for a Fuji/astro pcb 0.5m conveyor? pref from the UK or europe the length of the belts are approx 630mm and 6mm wide, flat with bumps on bottom side
Electronics Forum | Sat Jul 16 18:24:11 EDT 2016 | aemery
Scratches do not necessarily mean bad! Usually the forcer motor fails before a platen. The motors become weak or don't evenly distribute the supplied air, which causes them to tilt and drive into the platens. Mechanical misalignment of the VY forcer
Electronics Forum | Thu Dec 10 19:43:21 EST 2015 | ttheis
Regarding redundancy to keep an old GSM machine from going down, I've backed up my mapping, calibration and configurations files and I'm picking up spare parts here and there for the VME but I would like to have something in place in the even the mac
Electronics Forum | Mon Apr 19 20:14:11 EDT 2004 | andrewlog
Does anyone know where to buy or who to contact for ZCR spare parts. I am looking for a new conveyor drive motor and gearbox for a ZCR 4 zone reflow oven.
Electronics Forum | Fri Jan 04 22:01:25 EST 2013 | bradlanger
Depending on the age of your machine you should be able to find an IDE hard drive that will work at an online computer parts store like Newegg.com or Tiger direct. There is a possibility on the older machines that the motherboard bios could limit th
Electronics Forum | Fri Jun 08 18:30:53 EDT 2007 | jmelson
I have the entire computer box assembly from a 1306/40 series machine. This was one of the first with the AC servo motors and digital drives. It was taken from a working CSM66 at the same time as I bought a CSM84. It was included to be used as spa
Electronics Forum | Tue Jun 30 14:59:54 EDT 1998 | Justin Medernach
| Looking to contact some users of Vitronics reflow ovens. | Which model do you use? | Overall opinion of equipment and company? | Thanks in advance I use an SMR500 without inert reflow, although it's capable. I have had great success with this oven
Electronics Forum | Fri Jul 10 12:22:37 EDT 1998 | Ben Salisbury
| We are looking for spare hard drives for the Fuji MCS computer. I believe this is an MFM drive. Is this correct? Where can these drives be found? | Thanks. I was going through the archives and came accross this one...no answer...probably too lat
Electronics Forum | Wed Sep 10 10:25:48 EDT 2003 | r_astom
Jan, Please see our webpage regarding these programs for further details. http://www3.uic.com/__852568c80050acb1.nsf/0/f5455502658b71cc852569ca0045b8cd?OpenDocument The part number for the refurbished Unit Drive in question is 630 111 8123. Also,
Electronics Forum | Thu Jun 29 00:33:15 EDT 2023 | auriga2001
My background is in I.T. Here's what's likely the cause. It's old and worn out. Not much else to offer technical wise. Hard drives are mostly permanently sealed to keep dust out and have moving parts. Eventually they wear out. The way to prevent fail
