Electronics Forum | Tue Feb 23 09:26:34 EST 2016 | tombstonesmt
Good to hear! Never dealt with an assembly that large. 24" is the longest we've built. One issue we encountered was bowing due to the vacuum seal being too tight. Bowing caused transfer issues between conveyors and equipment. -TSS
Electronics Forum | Mon Sep 10 08:42:18 EDT 2001 | caldon
How do these components come packaged? Bulk, Reel, Tray,.... Some of the work bench manufacturers have X-Y pick ups for manual assembly. These x-y pick ups should fit over an inspection conveyor. Sorry I am drawing a blank when it comes to manufactu
Electronics Forum | Tue Aug 21 08:44:48 EDT 2001 | caldon
A) The standoff height of some uBGA components does not allow water to penatrate under the component. B)Water soluable may dilute the flux and not remove it all together. This can be tested with Ion Chromatography. C) Water soluable in some cases ne
Electronics Forum | Mon May 15 19:55:31 EDT 2000 | Dave F
Greg: The best one is the cheapest used one (that fits in the hole) from any company whose name you recognize, like: Simplimatic Engineering, POBox11709 Lynchburg VA 24506 800.238.3700 fax804.582.1200 Pat Ortz 561.793.9140 fax407.793.9568 Process C
Electronics Forum | Tue Dec 01 17:50:43 EST 2009 | swag
This is cut and paste from a Conceptronics Document - hope it helps you: Following are the lubricants recommended for oven maintenance: 1. To lubricate the conveyor chain use: A. Biral BIO30 -synthetic high temperature oil (highly recommended)
Electronics Forum | Wed Oct 03 23:59:44 EDT 2018 | gaintstar
Flason SMT problem solving: http://www.flason-smt.com/new/PRINCIPLE-OF-SURFACE-MOUNT-PROCESS-SMT-PROCESS.html http://www.flason-smt.com/new/Printed-Circuit-Board-PCB-Price-Estimator.html http://www.flason-smt.com/new/Printed-Circuit-Board-Solder-res
Electronics Forum | Tue Aug 02 15:05:38 EDT 2011 | davef
A couple of points: * Just a nit, 'screens' fell in disuse 10-15 years ago. Old habits die slowly don't they? * Yes, DEK and MPM each hold about 50% of the solder paste printer market and about 4 or 5 others hold the rest. SOLDER PASTE PRINTER EQUI
Electronics Forum | Thu Oct 04 00:05:25 EDT 2018 | gaintstar
Flason SMT chip mounter Reflow Ovens: http://www.flason-smt.com/product/PCB-assembly-line-equipment-SMT-spare-parts-Dek-Motor-188962.html http://www.flason-smt.com/product/PCB-Conveyor-for-LED-Production-Line-SMT-Assembly-Line.html http://www.flason-
| 1 |
winsouce.jpg)
