Electronics Forum | Thu Jul 25 18:41:52 EDT 2019 | myke03o
Hi I have solved the issue. The component cracking are the big 1210, 0603 and 0402 capacitors. After studying and testing in many type of solder. The best to use is SnPb and the components are the key - there are component which will tend to expand
Electronics Forum | Mon Feb 20 08:25:13 EST 2006 | Rob
No problem. If you get no joy you're going to have to change the footprint to a 1206 or 1210. Murata have a range of high Q value inductors (50-60) & from memory Toko used to be pretty hot too. The terminations on the coilcraft part are listed a
Electronics Forum | Fri May 04 12:19:53 EDT 2012 | gnus
I'm guessing you're running small batches of boards on the MyDatas. We had the same issue with management when they decided to save on parts (not realizing it cost them more in time and more frustration for us). We had Agilis feeders so that helped.
Electronics Forum | Mon Dec 25 08:43:35 EST 2017 | arjunkolavara
Hi , We are having Pin hole issues on the passive locations in the board after the SMT reflow process. Details: PCB surface Finish : ENIG . Solder paste : Alpha OM338 – M13 / Indium SMQ92J Location : Its Random and more on passive components. {
Electronics Forum | Tue Sep 08 15:11:26 EDT 1998 | Mike Demos
Rich: In my experience, I have seen three cases of SMT Capacitors cracking: 1. Due to thermal shock when entering the wave solder. Note that these were 1210 package sizes on the wave solder side of the boards. We were able to trace this back to th
Electronics Forum | Fri Jul 24 13:41:05 EDT 1998 | Bob Willis
Sorry guys have a look at this list of component weights and then work out the surface area of the lead/pad and then come back on the PLCC issue. Chip 0805���� 0.007g������ 2 Chip 1206���� 0.009g���� 2 Chip 1210���� 0.012g���� 2 SOT23���������0.008g�
Electronics Forum | Wed Jun 30 13:48:57 EDT 1999 | JohnW
| | | | | | | | | | | | snip | | | | | | | | | | | | | John and Dave, | | | | | | | | | | | | | | Again, I don't work with larger chip devices with this issue. The company I now work with developed a strategy, based on considerable research (as ot
Electronics Forum | Wed Jun 30 15:24:23 EDT 1999 | Earl Moon
| | | | | | | | | | | | | | snip | | | | | | | | | | | | | | | John and Dave, | | | | | | | | | | | | | | | | Again, I don't work with larger chip devices with this issue. The company I now work with developed a strategy, based on considerable res
Electronics Forum | Wed Jun 30 17:52:06 EDT 1999 | JohnW
| | | | | | | | | | | | | | | | snip | | | | | | | | | | | | | | | | | John and Dave, | | | | | | | | | | | | | | | | | | Again, I don't work with larger chip devices with this issue. The company I now work with developed a strategy, based on cons
Electronics Forum | Wed Jun 30 22:00:29 EDT 1999 | Earl Moon
| | | | | | | | | | | | | | | | | | snip | | | | | | | | | | | | | | | | | | | John and Dave, | | | | | | | | | | | | | | | | | | | | Again, I don't work with larger chip devices with this issue. The company I now work with developed a strategy, b
