Electronics Forum | Thu Jan 13 15:17:27 EST 2022 | goseese
Thank you very much I will look for something moving, loose or getting pinched when the table moves. -- Update -- checked every single connector, all the purple cables/connectors too. Everything it tight and not getting hung up. Checked all the
Electronics Forum | Wed May 19 14:09:29 EDT 1999 | JohnW
Wendy, I've done this before using a machined piece of FR4 material to hold the board (machined like a DEK plate )in place at the press . It ensures that the boards are alway's in the right place and that none of the components are damaged..also sto
Electronics Forum | Wed May 19 14:58:31 EDT 1999 | Wendy Casker
John, Thanks for the advice. I spoke with some of the connector suppliers apps guys today and they have what is called "European" style tooling which consists of top and bottom tooling. The board sits on rails and the Bottom tooling receives the pi
Electronics Forum | Fri May 21 15:51:49 EDT 1999 | JohnW
Wendy.. I found that little nugget a good one from my connector suppliers..Oh we have a tool to put it in for u..only catch was the one I needed was �37K ! ! after falling off my seat I went for something like what I described blow..cost about �1K.
Electronics Forum | Fri Jun 04 14:00:32 EDT 1999 | Arthur Burdick
Wendy, we at ASG make electric presses for press fit connectors, and have made fixtures for AMP Zpak connectors. give me a call i believe we can help. 561-848-6746 Arthur | Wendy.. | | I found that little nugget a good one from my connector supp
Electronics Forum | Tue Mar 16 14:37:42 EST 1999 | Steve Gregory
Hi Nancy! Just as Steve and Dean said, most printers have some sort of restrictions of what frame, where the image is positioned, ect. before the stencil will work in the printer. The two manufacturers that I'm most familiar with DEK and MPM do have
Electronics Forum | Tue Oct 31 13:15:13 EST 2006 | realchunks
SWAG is prolly right. You can verify the tactile sensor by watching the machine carefully. When finding the stencil height, make sure the board goes all the way up and touches the stencil to trigger the tactile. If it doesn't, then something is wr
Electronics Forum | Mon Sep 23 06:29:03 EDT 2019 | spoiltforchoice
Essemtec machines are quite good for small batch production. However you do need to bear in mind the FLX is quite small and depending how you use it and the options fitted might be limited on feeder count. You don't mention if this FLX is laser or