Electronics Forum | Mon Aug 28 08:43:27 EDT 2006 | aj
Hi all, I have just got a second hand bare board loader ( PAF ) It seems to be in good working order . The loader is upline to a Dek 265gsx. I have tried all the FMI protocols but none seem to work. I am now thinking that I moght need a different pe
Electronics Forum | Sat Oct 21 03:02:02 EDT 2006 | aj
All, We had a power cut the today. Machine times out on Actuators and Paste Dispenser hence it will not Initialise fully. I have traced back each related card but all seem to check out fine. Next step is PSU (looks awkward to access) Any ideas fe
Electronics Forum | Thu Sep 25 16:23:42 EDT 2008 | aj
Hi, Have you tried to download the MINT ?if this works you should be back in business , if not,check your PSU, which you can access from the back? check the manual as to which one powers the cards- dont have manual to hand but I think it is the 5v
Electronics Forum | Thu Jul 23 13:09:04 EDT 2009 | dekhead
We're most likely looking at X9 Personality card... You can swap X8 and X9. Can't recall seeing a failure in SCB40 in the 15 yrs I've been doing this. If not the personality then the PCIB (#5) in the PC. Feel free to contact directly (dh1@dekhead.c
Electronics Forum | Thu Mar 28 08:12:19 EDT 2019 | carehawk
We had an issue where a vision cable got cut and a few wires were exposed and possibly shorted. We fixed the cable and since then have had numerous errors with the last one being pneumatic power down. We have air to the machine and have checked the p
Electronics Forum | Mon Jan 06 11:41:52 EST 2020 | robl
JDT http://www.DEKHEAD.com if you are in the USA Adamtech http://www.adamtech.co.uk/contact.asp if you are in Europe There are some good Chinese suppliers, but a lot of Far East cards can be tarnished & with a reduced life due to running in a high h
Electronics Forum | Mon Jul 20 22:07:21 EDT 2009 | mika
Hi, I just read your post. I think I know what's your problem is. In the DEK 265 (I assumed that is the model?)There is a special card for such things. For. ex. Fuji interface, Panasonic, Siemens, and UIC SMPI - interface. Uninerversal has therir own
Electronics Forum | Mon Oct 11 17:02:06 EDT 2004 | M Deren
We have a DEK 260 with a intermittant table align stepper motor problem. The machine will work fine for awhile and then one of the table align motors starts either moving hapazardly in small increments back and forth or vibrates as if it wants to mov
Electronics Forum | Mon Oct 11 17:06:55 EDT 2004 | M Deren
We have a DEK 260 with a intermittent table align stepper motor problem. The machine will work fine for awhile and then one of the table align motors starts either moving haphazardly in small increments back and forth or vibrates as if it wants to mo
Electronics Forum | Fri Aug 28 11:39:23 EDT 2015 | dlee87
I have an issue with this DEK printer our company > has been having for over a year now. It seems > that DEK can’t narrow down what the issue > actually is as well. The printer is a DEK Horizon > 03i 09 SP13 P02. We are having an issue with
.png)
.jpg)
