Electronics Forum | Thu Jan 20 09:54:08 EST 2000 | Hany A. Salam
Hello there We assemble Add-On cards for the Personal computers. Naturally all of them have gold plated edges to be connected into the pc. My question is : What is the best way to isolate these edges while soldering in the wave solder M/C. Hany
Electronics Forum | Wed Feb 28 14:01:15 EST 2007 | john_smith
Chris, Is there a job scheduled down to the machine? If you don't have it you can call Siemens hotline @1-888-smt-help. They will talk you through any problems that you encounter. John
Electronics Forum | Wed Feb 16 20:51:37 EST 2000 | Jim
We have to place some LCC208's. The terminations are flush with the underside of the package, on an 0.5mm pitch. The pads on the board are flat tin. We'd like to get the part up in the air a little to provide some clearance for cleaning. Is there a w
Electronics Forum | Thu Jan 20 10:47:57 EST 2000 | Chad Notebaert
There are several ways to do this, if you are doing large volumes the best way is to use Titanium Finger Masks. You can have them custum made or if you are lucky one of the standard sizes will fit. They slide over the fingers to protect them through
Electronics Forum | Wed Nov 03 10:04:18 EST 1999 | PL Sasso
Hi Wes, I was very interested in your S20 problem since I am the Customer Support Center Mgr. for Siemens EAE here in the US. This sounds like a solvable problem. Most likely, due to the random nature, it involves how the vision is locating the pcb
Electronics Forum | Thu Sep 14 09:29:08 EDT 2006 | Steve Pollo0ck
James, is the board 24" long or print area. Essemtec offers a printer the SP900 with a 23.93" x 21.25" print area. http://www.essemtec.com/e/147.php here is the link to our website with a video. It is sold and supported in the US by Essemtec USA. it
Electronics Forum | Tue Jul 15 15:56:39 EDT 2008 | boardhouse
I believe she is looking for: KLDX-SMT2 Series Surface Mount DC Power Jacks CallUS: 1-888-KYCON-22 � Fax: +1 408-494-0325 � http://www.kycon.com Here is the link to their data sheet-http://anacapa.kycon.com/Catalog_PDF/KLDX_SMT2.pdf Dissclaimer:
Electronics Forum | Thu Jan 20 12:10:29 EST 2000 | Dave F
Hany: I have never understood why the add-on boards in PCs have gold plating on their connectors. In the military and in avionics, they require gold on connectors to protect from wear and corrosion. But PCs ave very different. PCs: * Are obsolet
Electronics Forum | Mon Aug 27 11:08:23 EDT 2007 | knutgaube
Siemens has always offered me a good service - no matter if i bought the equipment used or not. They are not even expensive. Check their hotline for further information. Hotline - direct link to SIPLACE The hotline is your direct link to SIPLACE kn
Electronics Forum | Fri Jul 23 12:47:20 EDT 1999 | Bill Schreiber
Dear Earl, At Smart Sonic, we have seen fiducial deterioration as a result of the epoxy not being water-safe. Unfortunately, many stencil manufacturers believe their customers are still cleaning with solvents and therefore use an epoxy that is solve
winsouce.jpg)
.gif)
