Electronics Forum | Tue Jan 18 13:07:52 EST 2000 | Michael Uganecz
Thanks for the feedback. It's been helpful. Michael Uganecz
Electronics Forum | Wed Dec 12 20:28:29 EST 2012 | davef
OSHA regulates eye protection under 29 CFR 1910.132 I've had inspectors confirm that eye protection was ANSI Z87.1 compliant, but have never had anyone question the level of protection provided by side shields.
Electronics Forum | Thu Jan 13 13:51:37 EST 2000 | Michael Uganecz
Hello, I'm doing some research on frameless stencils/stencil frames and I'm looking for people's thoughts on them. I'm looking for any and all thoughts/opinions on how well they work or don't work. Some specific areas of interest: tensioning in one
Electronics Forum | Fri Jan 14 08:09:20 EST 2000 | Wolfgang Busko
We are using frameless stencils with a frame system tensioning in X- and Y-direction. After first quarrels with our stencilhouse about the correct position of the tensioning holes ( they needed 4 tries to get it right) there are no problems any more.
Electronics Forum | Fri Jan 14 10:11:45 EST 2000 | John Thorup
I'll have to go along with Wolfgang as having a good experiance with frameless. We have been using a system from IIT in California for about a year. I was sceptical at first because of this system's X only tensioning but it does work. We use mostl
Electronics Forum | Wed Jan 27 19:52:05 EST 1999 | Wayne Bracy
| How ESD will be effected by painting the legs of the work stations. Any names of suppliers? | Ali: We represent GWS work benches and their line of ESD workstations include baked on esd paint on the frames plus esd work tops. You can contact G
Electronics Forum | Thu Apr 18 17:30:09 EDT 2002 | davef
It's a reasonable recommendation. Look here http://www.safetyinfo.com/safetyinfo/html/aa-guest-info/s-talk-chem-bonding.htm These will get you started: * http://www.princeton.edu/~ehs/labmanual/sec7-2.html * http://www.ccohs.ca/oshanswers/prevent
Electronics Forum | Mon May 30 09:11:15 EDT 2011 | davef
3a ANSI/J-STD-001: * Temperature and Humidity: 18-30°C, 30-70%RH ** If out of range, shall verify electrostatic discharge control program according to ANSI/ESD S20-20 is adequate. ** For process control, more restrictive temperature and humidity lim
Electronics Forum | Mon May 06 21:40:40 EDT 2013 | davef
ANSI/J-STD-001: * Temperature and Humidity: 18-30°C, 30-70%RH ** If out of range, shall verify electrostatic discharge control program according to ANSI/ESD S20-20 is adequate. ** For process control, more restrictive temperature and humidity limits
Electronics Forum | Wed Apr 23 13:33:31 EDT 2003 | davef
We divide our operations, repair, and office facilities into work area classifications, each with its own set of requirements and necessary control to meet the requirements of our procedure. The requirements are in the areas of: * Air Quality * Ligh
