Electronics Forum | Fri Jul 06 15:41:57 EDT 2007 | chrisgriffin
Does anyone know the default passwords for an Conceptronics oven HV-102? Software version is 2.50. Thanks
Electronics Forum | Sat Feb 24 09:49:26 EST 2018 | davef
+$3 / ounce * Humiseal 1B31 => ~$2.50 / ounce ... assuming same coverage thickness and that
Electronics Forum | Sun Feb 05 17:01:31 EST 2006 | GS
total footprint should be about 4 square meter Let's consider dimensions: - length (conveyor) = 1,58 mt - width (front+back)= 2,50 mt Regars.......GS
Electronics Forum | Mon Feb 04 17:47:20 EST 2019 | arbpkevin
When I power up the machine and it finishes booting into VIOS, I normally hit the ready button to power up the drives so I can perform the origin search. Instead of "latching on" the contactors pull in, and then quickly release. If you hold down th
Electronics Forum | Thu Apr 19 03:06:11 EDT 2012 | roblackey
Hi Gaz, I know it's not the most elegant solution but why don't you just buy 20 tubes of TSSOP logic IC's such as 74HCT27PW (depends on width)- these type of parts are around $0.05 each so you are not going to be paying more than $2.50 for a tube of
Electronics Forum | Tue Mar 01 23:55:41 EST 2011 | cmguan79
Hi all, Need help troubleshooting for I've just bought a 1997 second-hand oven HVC102. Unfortunately, after loading profile & press run mode we found all TC READING IS ZERO & CONVEYOR READING FEEDBACK IS ZERO SHOWN ON MONITOR SCREEN ,& I LOSS PA
Electronics Forum | Fri Aug 05 08:15:39 EDT 2016 | jdengler
The IP3 specs are: PCB Dimensions Max: 508 mm x 457 mm - Min: 80mm x 50mm Thickness: 0.8 to 4.0mm Component Capacity Tape: 74 - 8/12mm Device Locations Tray: 40 Locations Placing Rate: 0.55 sec/component for small chips 1.25 sec/component for ICs
Electronics Forum | Mon Aug 25 01:19:51 EDT 2008 | chrispy1963
We've got an older Conceptronics HVA102, 7 Zone, relow oven running software with the following info: (1) Machine Software Ver. Date: 9-1-94-Windows Rev 2.50c. (2) EPROM rev for the machine is: 386 AT WINDOWS (3) 486DX2 PC running Windows 3.1 as
Electronics Forum | Tue Oct 12 11:06:11 EDT 2004 | stefwitt
At least the few people left in this industry should make a stink, why all these jobs went to China and take efforts to get them back. If I take a typical line, which can do 20,000 components an hour, costs $ 200,000, a board with 50 different compon
| 1 |
