Electronics Forum | Thu Apr 10 07:47:47 EDT 2008 | ck_the_flip
Stencil design and pad layout are key. Too far apart - bad. If your pad geometry is correct, try the inverted home plate. That has worked well for me in the past. That, coupled with a 5-mil stencil. With regard to solder paste, some manufacturer
Electronics Forum | Fri Mar 21 14:14:59 EST 2003 | mantis
I have contacted both vendors with this issue and the both said they have never heard of such a problem and that they could offer no type of explanitation.The leads are 90 sn/10pb and 98sn/2pb respectivley. The parts are all connected to the vcc and
Electronics Forum | Fri Dec 27 16:12:54 EST 2019 | anteiv
thank you for reply here is picture of the board https://imgur.com/a/i2MfFBw on the bottom are pins/components which height is about 3-4 mm from bottom of the board we had to increase distance of board from nozzle to make clearance and we increas
| 1 |
.gif)
