Electronics Forum | Mon Sep 06 23:23:24 EDT 2004 | laxman
recently we bought Cyber Optic's LSM2 Solder paste height measuring system and we want to conduct SPC.Can anybody guide in this regard?
Electronics Forum | Thu Feb 15 20:27:11 EST 2007 | vshan
Hi Chris Good Day!!!! well we are running flex panel(150x270) with one connector(3 pin legs both sides) insert. Each panel consists of 28 parts and its used for disk drive industries. We are having a pallet to support with the top cover design such
Electronics Forum | Sat Jul 13 09:56:45 EDT 2013 | davef
Look here for guidelines http://www.sensata.com/supplier/pdf/CQI-17_Soldering_System_Assessment.pdf Special processes" refer to processes that produce outputs whose output cannot be verified before being released to the customer. These products and
Electronics Forum | Tue Mar 23 07:35:42 EDT 2010 | jooh
Since I'm new to the forum I probably ask previously answered questions (that I have not found) but I would be grateful if someone could clarify this for me. I'm in R&D at a company where we design low volume (1k-10k) fairly complex PCBAs for our pr
Electronics Forum | Sun Nov 08 15:27:25 EST 2015 | davef
Thinner: Flux thinner, NOT paint thinner We kept a spare stone in thinner in inventory. We cut PVC pipe to size, cap in one end, screw thread on the other, stone inside, filled with flux thinner and covered with a screw cap. I don't remember who we
Electronics Forum | Fri Sep 22 16:21:31 EDT 2006 | patrickbruneel
Figure 1. Human Toxicity Potential, Life-cycle Comparison Tin/lead solder paste is the top formula. SAC is second from the bottom.3 RoHS Report Excludes Comparisons By George A. Riley, contributing editor A European Union (EU) Commission for Envir
Electronics Forum | Sat Feb 14 19:35:51 EST 1998 | C. Lao
Mr Lao We have some specialist knowledge on this subject and offer both equipment and services for these tests. My first recommendation is that take coupons manufactured by your PC Fabricator and then samples at each manufacturing stage: Bare coupon
Electronics Forum | Mon Nov 09 09:44:22 EST 2015 | davef
Purpose. This describes setting-up a wave soldering system set-up for a new assembly design or checking a wave solder machine operation with a test board. Applicability. To be used for new design printed circuit assembles and during machine accept
| 1 |
