Electronics Forum | Fri Apr 30 10:46:27 EDT 2004 | bpeay
Greetings all, Forget Tyco for any help but try SMS Technologies in England. These fine folk might be able to help, and they make a heck of a jelly filled donut.
Electronics Forum | Mon Feb 27 21:08:21 EST 2006 | ChrisG
I have never seen that message before, but you should check the Z axis driver card, and the Z home sensor. Do you hear anything when the axis tries to move?
Electronics Forum | Tue Mar 07 00:03:24 EST 2006 | rbodmer
i no longer work with mpm machine's but mpm has excelent tech service and there manuals have all error codes listed. www.speedlinetechnologies.com
Electronics Forum | Tue Mar 07 00:11:30 EST 2006 | jgarver1
Is this a new machine to your facility? I have seen MPM UP3000's give error while homing if the transformers are not tapped exactly at the line voltage. Just a thought.
Electronics Forum | Mon Jun 19 14:00:46 EDT 2006 | choppy
Check for anything that may contact while activating Z tower (support, wire, connector, etc) I also saw one day a lost PCB causing that kind of problem ?!?!?!?
Electronics Forum | Mon Jun 19 15:13:42 EDT 2006 | Chunks
There is also plastic link on the shaft that raises your Z-Table that may have come lose or broken. Is the Z-Table able to move up and down in Supervisor mode?
Electronics Forum | Mon Jun 19 21:25:47 EDT 2006 | Chris
Try raising the table in Calibrate mode. Sensor or Tactile connector could be contacting the underside of the rails and overloading the axis. Check for 24V on the Z-axis brake. Check the fuse(F5) and voltage to the driver. Check DIP switch settin
Electronics Forum | Thu Mar 27 05:09:26 EDT 2008 | d0min0
maybe it is worth trying that one? don't understand chinese http://bbs.smthome.net/read-htm-tid-96873-fpage-2.html
Electronics Forum | Mon Jan 02 13:52:03 EST 2023 | thanhctran30
Does anyone know the services engineer password for Ke2020? I'm trying to check to see if laser is bad and it required service engineer password. Thanks,
Electronics Forum | Fri Dec 15 12:00:10 EST 2000 | Chris May
John, The customer is always the next guy in the chain, so, yes your disty would be your immediate customer. However, unless they actually "use" the product, will they know if it is faulty ? Obviously "customer returns" will come from the end user,
winsouce.jpg)
.gif)
