Electronics Forum | Thu May 30 10:32:49 EDT 2002 | alcarey
Does anyone know of a contrator that repairs Universal 4790/91 (Sanyo TCM 1600 feeders)?. Thanks Andy Carey
Electronics Forum | Tue Jun 25 10:36:10 EDT 2002 | Vincent Balboni
Do you have a fixed number of components that you write off each time a feeder is loaded.
Electronics Forum | Tue Jun 25 11:26:11 EDT 2002 | pdt203
Sometimes when a customer has sent parts on reel without any leader, we will take out the first 5-8 parts and then tie off the cover tape with some leftover tape from the last run. We keep those parts we removed and then place them back in the feede
Electronics Forum | Wed May 08 10:05:42 EDT 2002 | Claude_Couture
Maybe the problem is not the cutter, but the arm that advance the tape in the adjacent feeder gets actuated at the same time as the active feeder. line-up a feeder in pickup position visually, then turn the crank until the roller or feeder advance me
Electronics Forum | Wed May 22 17:19:48 EDT 2002 | Hussman69
CP and most other turret style machine have a fixed camera and cannot "see" the feeder.
Electronics Forum | Tue Jul 23 05:41:13 EDT 2002 | kumarraju
first you need to have bar code stickers put on to your feeders.You need a tracking software to track your feeders using the bar code.you need to do periodic maintenance on your feeders and very important is calibrations.it is best to set up a feeder
Electronics Forum | Tue Jun 04 15:21:20 EDT 2002 | jax
To make it simple: A Feeder protection plate is just a flat piece of metal that hangs over the feeders, inside the machine, and keeps the feeder cover from popping up and crashing the head.
Electronics Forum | Mon Jul 22 11:41:11 EDT 2002 | Claude_Couture
The trick is to put a serial number on each feeder and use a maintenance tracking software. There are commercial software out there that do just that. Some even use the barcodes to track the location of the feeders, so you know which machine it is on
Electronics Forum | Wed May 22 08:26:28 EDT 2002 | cyber_wolf
Mydata uses fiducials on their feeders. I am not sure whether or not your are familiar with Mydata feeders, but its pretty basic. The feeders are actually magazines made up of multiple individual feeders. Example: There are 16 8mm feeders in (one)8mm
Electronics Forum | Wed Feb 27 12:38:49 EST 2002 | stmerkt
Tyco has recently completed development work on the ThinPRO feeder. This feeder provides exceptional performance for 0201 and 0402 applications. The feeder is compatable with the IV-C, QSV, QSX, QSP-2, and APS platforms.
winsouce.jpg)