Electronics Forum | Tue Feb 03 22:38:22 EST 2015 | slouis2014
Hi guys. I need to update the existing DFX guideline (PCBA) of our company, the last revision was 2009. Their's a lot to update for the latest technology nowadays. any document recommendation is very welcome.
Electronics Forum | Thu Mar 12 03:14:14 EDT 2009 | nibirta
Thank you for support. As i promised you, I am coming back with the results. The SM used was Probimer 77 with Kester 979 flux. The supplier says that there is an incompatibility and we have changed the flux with IF2009M. Same problem! They have chan
Electronics Forum | Mon Nov 30 19:57:18 EST 2009 | ceiaen
Hello All, > > I work for an aerospace OEM, and I > am responsible for putting in the Counterfeit > Protection Plan. I'm familiar with the > requirements etc., and was wondering if anyone > out there has already set one up. If so, did you > se
Electronics Forum | Mon Nov 23 23:13:53 EST 2009 | wyko007
I recently purchased a CSM84VZ Type PA130460. The machine did not come with any reference material and its a pain learning by creating errors. Can anyone share with me any related material that is necessary to get the tool running smooth. Thanks in a
Electronics Forum | Tue Feb 17 14:33:27 EST 2009 | tedel
Realize this thread is a bit old, but others may start inquiring soon... Just learned Biral USA in McLean, TX is no longer in buisness. Does anyone know of any other stateside distributers for the Biral T&D? Called 'Grainger' and they do not carry it
Electronics Forum | Tue Mar 17 16:56:45 EDT 2009 | gregf912
Sorry Keith but is not possible to place 0201 parts on the CP43 machine. THe XY table is not tight enough on the resolution or the Z height. The parts camera will not be able to tell the part from the nozzle. THe CP6-4000 machine can not do 0201 part
Electronics Forum | Fri Jan 23 11:36:18 EST 2009 | smt_guy
Hi Guys, What about Tear Down process? example is upon job accomplishment in my P&P machines my operators have to unload all those feeders...are they still part of Direct Labor Costing or Indirect Labor Costing. Our process is that Tear Down is an
Electronics Forum | Sat Mar 14 21:22:48 EDT 2009 | adretech2
We are able to repair Cognex vision cards VM16, VM16A for DEK, MPM, Camalot and other machines. So far- 100% success. We are from Canada. We DO NOT ship your board to other repair shop and take commissions, like many others do. See http://www.art-ind
Electronics Forum | Mon Aug 04 13:13:21 EDT 2008 | patrickbruneel
The 2009M is a water based flux and requires more preheating compared to alcohol based fluxes. After checking real chunks advice you might check if you hear sizzling when the solder touches the board (indicator that the water is not eliminated by you
Electronics Forum | Thu Jan 22 11:15:08 EST 2009 | slthomas
I got mine from my used equipment broker, and it was version 1.5. I would try wherever you get your spares from. My recollection is that the "free" versions (1.5 and older) are not available through Assembleon anymore and that the current version
