Electronics Forum | Tue Feb 26 16:07:07 EST 2013 | kevslatvin
What vintage are the gem series you are running? We have some '06 Opal Xii's and place 0201's with them. Haven't tried 01005's. I know you said new but Cardinal Circuit has an auction gonig right now that has a 2010 Assembleon MG1 and a 2006 MG2 and
Electronics Forum | Sat Mar 04 11:07:21 EST 2006 | charls
hi pavel, If you are getting vibrate during fast mode, encoder or motor cable might be faulty. yes i faced the same problem in Juki KE2010 m/c. Try by replacing encoder & motor cable from Motor to driver unit. All the best
Electronics Forum | Fri Dec 29 11:20:59 EST 2006 | Pete
No experience with 5 of the 6, but have owned Juki for 3 years, after an extensive review of competitive units. Now have a 2010, 2020, 2050 and 2060, all EXCELLENT machines! OUTSTANDING Service organization, No charge for software upgrades, LOW co
Electronics Forum | Thu Oct 28 09:55:54 EDT 2010 | dyoungquist
We have a Heller 1707EXL (7 zone) and have been doing lead free with it since 2006.
Electronics Forum | Thu Oct 21 15:30:56 EDT 2010 | remullis
Search on Attrition, I think most companies start around 2% across the board. I have adjusted mine higher for 0603, and parts where I experience tape issues constantly. We are running parts with date codes back 2006,2008.
Electronics Forum | Wed May 19 15:42:46 EDT 2010 | davef
Hear ya. Mostly, we production people. So, we shy away from home brew soldering techniques, unless we get ourselves in a mess. That being said, there's a fair amount of stuff on the web about home brew BGA and fine pitch QFP soldering. Here's an
Electronics Forum | Wed Aug 25 12:13:40 EDT 2010 | remullis
You may want to search on "Cover Tape", what date code is on the parts reel? I have multiple issues with cover tape sticking to the paper and not peeling back. Causes pick errors due to the part being covered. I think my problem is the parts have too
Electronics Forum | Wed Oct 13 06:20:00 EDT 2010 | costache
Dear All > > I need to check the solder paste > volume inside the PTH at our board,which size is > 440x620 mm.So, I may need 3D inspection > machine,AXI, not AOI.So, does anyone recommand me > which 3D machine is suited to my PCB? Thanks in > a
1 |