Electronics Forum | Thu May 21 01:52:45 EDT 2015 | aemery
The AP-HIE came with paper manuals. I need to keep my paper manuals and don't have an extra, but the last model of the AP, the AP-Excel, came with manuals in PDF. I could burn a CD and send it to you. The machine use and operation is almost identi
Electronics Forum | Mon Jun 29 07:17:25 EDT 2015 | donlockard
Seho maxi wave 3240 should be considered as well. Invented full tunnel nitrogen systems that have lower operating costs and provide yields unlike what can be achieved by air wave systems.
Electronics Forum | Fri Aug 21 09:36:50 EDT 2015 | esoderberg
Looking for better design information than is contained in IPC 7525A. Specifically the minimum trough width and length of the step to achieve the necessary paste reduction.
Electronics Forum | Thu Aug 27 16:44:11 EDT 2015 | esoderberg
I have that article. While some of the information is helpful, there is no direction as to the length and width of the step to achieve blade deflection to reduce paste.
Electronics Forum | Thu Jan 29 09:29:42 EST 2015 | rgduval
In general, it depends on what you're working on. Boards with a higher thermal profile might require higher temps. But...the usual answer is...set your irons to the lowest temperature possible that still achieves the goal. We usually keep our ir
Electronics Forum | Thu Feb 19 05:32:29 EST 2015 | aj
not a user of either machines but I have assessed quite a lot of machines and iineo II ticked every box for me... But like others have said, really depends on what you need to achieve with the machine....if you are an OEM and you have a fair idea of
Electronics Forum | Mon Dec 21 10:14:53 EST 2015 | jax
Many Manufacturers make Large board capable machines. A quick way to find them is to look for LED machines, the lengths should range from 32" to 52", although some simply manipulate the staging (clamping) area to achieve length. The trick is finding
Electronics Forum | Thu Feb 12 16:42:33 EST 2015 | hegemon
I can only speak for Mirtec and Yestech AOI for SMT Solder Inspection. We do use Koh-Young AOI for Solder Paste Inspection. As usual ,you need to identify exactly what it is you are trying to achieve with your AOI, if you are just trying to fill a
Electronics Forum | Mon Feb 16 22:34:24 EST 2015 | anvil1021
WEll unfortunately I know the answer to your dilemma all too well and I will make it easy for you. The Koh Young takes a miracle to program and the Mirtec has a superior software and 3D system when you have the MV9 system. Just to day I was measuring
Electronics Forum | Fri May 15 10:12:21 EDT 2015 | capse
I'm the Rep for Vitronics Soltec and ASYS EKRA in the southeastern US. I suggest you take a look at Vitronics ovens. The AutoSet feature makes new profile development as easy as possible without buying a third party accessory, The new EKRA user inter
.gif)
