118 2015 wanted results

Electronics Forum: 2015 wanted (Page 1 of 12)

DCT cleaner

Electronics Forum | Fri Feb 06 02:42:30 EST 2015 | twinkl1234

hello, if u want a DCT parts so please contact me on her http://powertekelectronics.net/

JOT conveyor spares

Electronics Forum | Fri Apr 03 11:19:33 EDT 2015 | davef

You might find your equipment want here: http://www.smtnet.com/parts/

dek horizon 265

Electronics Forum | Fri May 29 06:50:04 EDT 2015 | buckcho

Hello, can you explain better what do you want to check? Alignment is done based on fiducial check and then you can do some offsets, based on the print. So I am not sure what do you want to say...

Rigid + Flex PCB Wave Solder?

Electronics Forum | Tue Feb 17 12:02:16 EST 2015 | allwave

If you do not want to invest in a wave pallet, then you'll have to find a way to equalize your thermal mass across the PCBA so your machine settings work for both "PCBs" (Ridig+Flex). My $0.02, George

Japan Unix Destop Soldering Robot

Electronics Forum | Fri Jun 12 09:31:10 EDT 2015 | g2garyg2

George. I also wanted to let you know that PROMATION is now an exclusive distributor for QUICK soldering robots. These are about 1/2 the cost and work very, very well.

Encapsulating prior to Potting

Electronics Forum | Wed Feb 25 11:47:09 EST 2015 | emeto

What are the chances for redesign the board or use substitute for the current tall part? Sometimes the hassle you want to go through could be avoided. How about change the box the device goes to or modify/ customize it to fit this part better in?

IP3 MFU Y adjustment

Electronics Forum | Fri Feb 27 10:31:59 EST 2015 | mdang

We bought a use IP3 and we want to make adjustment in Y direction of the MFU. Is this proper setting or Mechanical calibration? Thanks, -Michael

conformal coating

Electronics Forum | Fri Apr 17 08:52:03 EDT 2015 | charliedci

Thanks for the info Sarason. The UVCL is a Urethane. Did not want that hard of finish (for solder rework issues). We like the Acrylic as acetone will remove cured material for solder rework.