Electronics Forum | Fri Mar 06 10:15:55 EST 2020 | cyber_wolf
Shell Gadus S2 V220 is the new version of Alvania. You can get it from McMaster
Electronics Forum | Sat May 09 00:03:52 EDT 2020 | compit
I don't know how in Germany, but in Poland it used to be 220V (380 for 3 phases), now it is 230V (400). Probably, after the change, no one switched the voltage to the trafo in the machine - these are old machines.
Electronics Forum | Mon Jan 06 09:49:36 EST 2020 | andrewpayonk
Hello, I recently purchased a Hotflow 3 oven, using a step up transformer I received with unit, 220v to 480v. Unit turns on but does not heat up. Getting an F02 error saying no convection. I am getting 480v to oven, I also switched the phase still
Electronics Forum | Tue Feb 25 16:45:45 EST 2020 | stephendo
One thing that you do not want to do is run a 240V oven at 220V. One place I worked a few lifetimes ago had an oven that had five top zones and only two on the ends on the bottom. It was something like 440V but supplied with 408V. It took a long long
Electronics Forum | Mon Jun 15 16:51:05 EDT 2020 | emeto
Tin/Lead has 183C melting point and probably around 220 peak temperature at reflow. Tin has 232C melting point. I would assume that based on this information you would understand why intermetallic joint is questionable. Go to any flat finish. HASL wi
Electronics Forum | Wed Feb 12 14:38:18 EST 2020 | SMTA-Alex
There are several areas you can check. Your profile is very fast. You reach the peak at around 3 minute mark. That's not enough time for the fillet to form. Try to slow down your belt speed to around 90-95, to give it more time. Also, your temperatur
Electronics Forum | Tue Feb 18 20:04:38 EST 2020 | SMTA-Alex
Sebas, some things in your profile don't make sense. 3 of your thermocouples, #1 # 4 and #6 are consistent. The others show completely different data. The consistent thermocouples, also, show peak temp at 241 - 243 degrees. That is extermely high for
Electronics Forum | Thu Apr 09 15:31:05 EDT 2020 | kumarb
Thank you for the replies. Neither the analog dimmable ballast (1-10V) nor the dimmable T5 2G11 socket bulbs have been fun to source. After countless hours of searching, believe that the Ebay listing here (Philips) is compatible: https://www.ebay.co
Electronics Forum | Thu Oct 04 00:05:25 EDT 2018 | gaintstar
Flason SMT chip mounter Reflow Ovens: http://www.flason-smt.com/product/PCB-assembly-line-equipment-SMT-spare-parts-Dek-Motor-188962.html http://www.flason-smt.com/product/PCB-Conveyor-for-LED-Production-Line-SMT-Assembly-Line.html http://www.flason-
| 1 |
winsouce.jpg)
