Electronics Forum | Mon Apr 11 06:37:59 EDT 2005 | amstech
As long as you have a continuous profile with required soak and dwell periods, the zone lengths do not matter. For lead free, usually ramp to peak is preffered.that is with minimum soak (you can not avoid soak anyway. You can achieve the profiles irr
Electronics Forum | Fri May 21 03:01:22 EDT 2004 | Nitro
I want to know the pressure of N2 in each zone in furnace. If have standard it will better.
Electronics Forum | Thu Oct 26 17:48:12 EDT 2000 | ptvianc
Hi: Generlly speaking, in a reactive mode, nitrogen blankets are used to improve the yield of a process that is marginal in terms of removing, and/or preventing the re-appearence of, oxides on copper features or component I/Os. That marginality can
Electronics Forum | Thu Jan 08 16:43:43 EST 2004 | Dean
Unless your machine (internal) thermocouples are each calibrated and compensated no two machines will deliver eactly the same results. Here are your challenges: 1. Data acquisition equipment A-D converter errors 2. PCB measurement thermocouple (t
Electronics Forum | Thu Apr 15 20:41:22 EDT 2004 | Ken
There are ledgitimate reasons for checking furnace calibrations, but let me clarify what that is. 1. TC's are not necessarily calibrted. Not unless you need "absolute" accuracy. TC's operate against a (non-linear) standard +/- a tolerance. Most
Electronics Forum | Mon Feb 02 22:01:24 EST 2004 | Dean
I find this disturbing when customers dictate your process and equipment? Your responsibility is to deliver a quality product on time. Why would your customer care HOW you achieve this? Hence the success of Chinese manufacturing. I have one custo
Electronics Forum | Wed Apr 05 11:55:28 EDT 2006 | Cristina Oanca
I am working on a Substrate attach process. The package is gold plated, the preform is AuSn and the backing on the substrate is PdAg. I am using a Sikama reflow furnace. The profile has a 50 sec dwell time. I am over 280 degees C for a little over 1
Electronics Forum | Tue Mar 09 07:06:42 EST 1999 | Charles Stringer
| | | | I need to setup an oven to run with a nitrogen atmosphere for | | boards with BGA's, but our ovens do not have the optional atmosphere monitor and controller. Is there a good way to sample and control the atmosphere without the optional bui
Electronics Forum | Thu Mar 17 23:14:23 EST 2005 | KEN
Check your furnace for "level".
Electronics Forum | Thu Jun 30 18:28:47 EDT 2005 | KEN
1. Migrate to horse-shoe pad design. 2. Verify your furnace is level. 3. Verify your chains are not jerking around. 4. Speed control for fans / gas amplifiers are correct or normal? 5. (this happended to me once) Make sure you don't have any f
