Electronics Forum | Fri Sep 24 12:02:57 EDT 2004 | Frank
Yes, I can see your problem, the nozzle makes only good contact in the center and so the ends don't make good contact. The ends tend to curl up during reflow. There were two suggestions to solve this. 1) Let the operator push down the labels befor
Electronics Forum | Fri Jun 20 01:12:50 EDT 2008 | chrispy1963
Look into a used Siemens F-4 or F-5. These machines can be had for a reasonable cost, they are easy to maintain, the footprint is small (7' X 7.5') and they are simple to program. These machines have a 12 nozzle "Star" revolving placement head for
Electronics Forum | Sun Aug 26 12:40:59 EDT 2001 | stefwitt
I would like to enter the discussion by tossing some numbers in. First of all I don�t like the 3 Sigma value. 3 Sigma are 2000 defects per mio. if I remember correctly. This means, if you have 200 components on the board, then every 10 boards have on
Electronics Forum | Wed Jul 27 12:50:59 EDT 2005 | mnguyen
You may want to look at which spindle that is dropping the nozzle and check the O-ring on the spindle head. It's probably bad, cracked, or broken. Replace it and that will fix it
Electronics Forum | Sat Feb 12 13:19:27 EST 2011 | tpappano
A simple trick I read either here or on another P&P forum is to use "Silly Putty". Place a small thin spot of Silly Putty on the top of the front conveyor rail, and put the machine in "manual" mode. Steer head #1 over the putty and lower it, leavin
Electronics Forum | Wed Jun 02 16:33:08 EDT 2004 | davem
Fuji is the best, but there are other alternatives besides Quad. If you really want to look at Fuji, take a peek at their XP142E series. With "Vision processing on the fly" and a "Mini Turret Head" with 12 placement nozzles it should fit your needs n
Electronics Forum | Mon Oct 09 13:36:30 EDT 2006 | ppminc
Phil, The QSA-30 was built by Sam Sung, Sold by Quad. Single Head 2 Nozzles around 11K CPH Quad does not support the machine but I believe you can get parts direct from Sam Sung. I am not sure if they have a registration fee. The QSA used Quad made
Electronics Forum | Sun Nov 08 15:27:25 EST 2015 | davef
Thinner: Flux thinner, NOT paint thinner We kept a spare stone in thinner in inventory. We cut PVC pipe to size, cap in one end, screw thread on the other, stone inside, filled with flux thinner and covered with a screw cap. I don't remember who we
Electronics Forum | Thu Jan 20 08:26:22 EST 2022 | oclsc
Hej SMTnet. I have some questions regarding when to replace nozzles at the H12HS and DX mounting heads (Fuji Aimex 2, running Nexim). 1. Is there anyone here at this forum who has any experince how often it make sense to replace the nozzles in orde
Electronics Forum | Thu Jan 27 13:41:15 EST 2022 | kojotssss
You are fuji machine user, you can creat account on fuji technical member site.
