Electronics Forum | Wed Jun 22 09:42:51 EDT 2005 | davef
Not sure what a higher Tg laminate will accomplish. Can't hurt though. Remember, when soldering to Alloy 42, the surface is 42% nickel. So, you need to raise the reflow temperature some 15 to 20*C over what is needed for copper. Also, sometimes All
Electronics Forum | Fri Jun 03 16:40:48 EDT 2005 | Andrea
I have a customer who has put a restriction against pure tin finish components. We have gotten our BOMs compliant with all but 5 parts. Fairchild p/n FDD6512A, FQD12N20C, IRLM120A Bournes 3214G-1-501E Sprague 10TS-D10 I am looking for a standard pr
Electronics Forum | Tue Aug 23 14:23:00 EDT 2005 | pjc
Most ovens I know use oil to lubricate conveyor chain, not grease. Anyway, is this what you're using: NMG No Melt Grease NLGI 2 (operates from -20�C to +270�C) NMG is a long-fibred highly adhesive grease which does not melt or drip at high temperat
Electronics Forum | Wed Feb 02 08:51:25 EST 2005 | Dougs
we have a capacitor cracking on one of our boards, there are four of the same cap on the board and only one cracks, we are seeing about 6% of the component cracking. it's not near the edges of the board and he board is 2.4mm thick so i dont think it
| 1 |
winsouce.jpg)