Electronics Forum | Thu Nov 29 15:52:53 EST 2007 | jmelson
Some other machines are a lot simpler. Here's how the Philips (mady by Yamaha) CSM84 works. Smaller tape (8 and 12 mm) feeders are all mechanical. A plunger on the head pushes a lever on the feeder at the same time the head comes down. First, the
Electronics Forum | Fri May 04 02:32:10 EDT 2007 | jmelson
Thanks! Well, the procedure in the book says to first calibrate the mech aligner with the beam sensor, but that exceeds the X travel. I guess you can just eyeball it off the nozzles and then use trial and error. While poking around on the machine
Electronics Forum | Wed Mar 28 23:02:50 EDT 2007 | jmelson
If I couldn't afford to go to Boston to get some training from the seller, I certainly can't afford a week in Australia! But, thanks for the offer. I do have the HHK (hand held keypad, that's what Philips calls it.) And, after tinkering with var
Electronics Forum | Fri Mar 28 15:08:37 EDT 2008 | jmelson
Hello, all, I have been having problems with bent push rods on my Philips CSM84. I have caught it a couple times when it happened, but it happens so fast I still don't know exactly what the sequence is that causes this. The push rod is clipping a
Electronics Forum | Wed Jan 02 12:15:44 EST 2002 | pteerink
Don't waste your money on T&R feeders for large parts. I used to have an old TP9 and we ran tons of products with vibe tubes and odd shaped parts. Used to cut our own tubes for parts and jimmy-rig parts like crazy to make them all fit on the machine
Electronics Forum | Tue Dec 05 15:40:05 EST 2006 | jdengler
What year is your machine and what year is your Electric Drawing? My machine is 1989 and so is my drawing. I do not have a SIP-1750 drawing. The IP went through several changes during its production so your machine may not match mine. The CON I/F
Electronics Forum | Fri Apr 08 21:39:17 EDT 2011 | jimlas53
Hi, We have a Quad IVc set up with all picks, placements, and sequence working. I have managed to get through several passes with some pain, mainly from SOT-23 parts, but it is getting better. On occasion, when picking from one of three feeders loc
Electronics Forum | Thu Jun 02 18:16:26 EDT 2005 | URI
Look into the Juki KE-2060E machine. I have been > extremely pleased with this machine. It will > hold 80-8mm feeders, place 0201 (0603-metric) up > to 74mm square ICs and BGA, 150mm long > connectors. Up to 25mm tall components. It can > ha
Electronics Forum | Thu Jan 24 10:38:37 EST 2008 | vikkaraja
Hellow there, I need some help with a very old CP machine. It worked great until this past week.All of sudden it stoped woking. It does not index the feeder during production.I checked rotary selonoids already in the CAM box for first station and noz
Electronics Forum | Thu Mar 31 04:39:56 EST 2005 | zsolt
Hello All, we have 2 CP842 on site and they are running simply perfect. We used our existing CP feeders (with the small reel holder). CP843 can compensate pick-up both in X and Y direction. also measuring the height of the part with a laser sensor.
Industrial Sensor Vision International specializes in advanced camera technology of high resolution fast speed cameras for automation, AOI, 2-D/3-D, SPI inspection and wafer inspection.
3 Morse Road 2A
Oxford, CT USA
Phone: +1 203 592 8723