Electronics Forum | Mon Oct 29 15:58:47 EST 2001 | davef
Kitting: Buy-in material in kit form that is complete and in the proper form. Line set-up: Layout all boards to be the same width. Printer set-up: Use a dispenser, instead of a printer. Dispenser set-up: Program & debug off-line. Placement machin
Electronics Forum | Fri Oct 26 11:34:44 EDT 2001 | pteerink
Paul, Many variables that affect changeover, here's a few to start with: 1) Feeder count- do you have enough feeders to be able to do a complete setup off-line? Take your product that uses the most amount of feeders, and make sure you have at least
Electronics Forum | Fri Oct 26 06:23:03 EDT 2001 | Paul
I am working on a projet to reduce changeover times on our lines from product to product any ideas to minize time..eg feeders, kitting, etc. appreciate any help guys
Electronics Forum | Fri Oct 26 11:37:27 EDT 2001 | Dave G
You could start by putting together a matrix of P/N's vs product. This will tell you which parts are common with most of your jobs. These would then become part of a fixed feeder setup that would stay on the machine. (These will probably be mostly R'
Electronics Forum | Thu Aug 08 18:21:21 EDT 2019 | Aaron
I recently purchased a contact systems 3, and 3s, and 4 of their 3zs. they were all used in various states of working. supposedly one 3s and 3z were working when taken out of service and had sat for a few months. another 3z had a homing issues and th
Electronics Forum | Fri Apr 30 07:29:02 EDT 2021 | dilogic
Status output is pin 2. On pneumatic feeders it only shows if the feeder is inserted, on electric feeders it doubles as feeder insertion and goes off if the tape is exhausted or feeder is jammed
Electronics Forum | Mon Dec 11 14:09:58 EST 2017 | deanm
Some pick and place machine manufacturers offer dual lane feeders which may double the machine's feeder capacity. What are the pros/cons of using dual lane feeders in a high mix environment? Are they just for 8mm? Thanks!
Electronics Forum | Thu Apr 05 18:18:56 EDT 2007 | coop
We get our splice tape through splicetronic solutions, I recomend the double splice tape. steir also makes the double splice tape it works good for attaching strips together and also for putting leaders on the tape, if your feeders require. GOOD LUC
Electronics Forum | Tue Sep 28 17:38:28 EDT 1999 | JAS
| Can anyone tell me how a Panasoinc MV feeder and a MSH feeder compare in terms of component sizes and placment speeds? I was told that MV feeders can run on an MSH although they take up 2 slots. I'd appreciate the help. | | Regards, | | Jason R
Electronics Forum | Sun Mar 26 10:54:44 EST 2006 | smtek_cc
Would like to know if Fuji have made the CP7 0804P feeders in black body type. I currently purchased some 0804P feeders in black body type with the double safety lock. Someone said this is CP643 type. Not sure if this can be treated as CP7 feeders.
