Electronics Forum | Thu Jan 21 02:26:30 EST 2021 | baldoino
I would like to sell used pick and place feeders for Siplace. How can I offer them (70 x 8mm; 20 x 12/16; 05 x 24mm.
Electronics Forum | Mon Mar 05 22:31:43 EST 2012 | acsscott
Using the 72A FNC nozzles to place 3216 resistors, and 74F nozzles to place PLCC6 LED's. The LED's ar 5mm x 6.5mm x 2.4mm tall.
Electronics Forum | Fri Mar 05 00:53:09 EST 2004 | alwil
I have an Electrolytic capacitor which is 17mm in diameter and is 16.7mm in height. It is presented in a reel,44mm x 24mm. I want to know if there is a suitable feeder available to place this part onto a Fuji IP3. Thanks, Alan.
Electronics Forum | Wed May 08 09:49:17 EDT 2002 | Hussman69
Hello, We are experiencing a little problem of cutting feeder tape. When ever we place two or more 24 mm feeders together, the cutter on the machine will partialy cut the adjoining tape, or pull it out of sequence. The machine is a Panasonic MSR,
Electronics Forum | Mon May 18 06:33:10 EDT 1998 | Odyssey
I am interested to buy some Yamaha feeders! 8mm, 16mm and 24mm for Hyper series YM-84II. Can You help? | The thread on GSM's inspired this: We have a tough time making the trade-off on GSM's work. The next option we like is the Philips (Yamaha) Em
Electronics Forum | Fri Sep 27 10:01:25 EDT 2002 | stefwitt
chips up to 1411 ( I have not seen a 1411 component yet, but 1210 is a good number ) in 8 mm, IC up to SO8 in 12 mm, IC up to SOL 20 fit in 16mm tape. This is just a basic rule. You may also find SO 20 in 24 mm tape. More important is the reel width,
Electronics Forum | Fri Mar 23 19:50:57 EDT 2007 | Frank
Possible head combinations to pick from multiple 12, 16, or 24mm feeders. Note: you can not mix feeder sizes for simultaneous picks. KE-2010 and KE-2050 will use 1&3, 2&4, or 1&4 KE-2020 and KE-2060 will use 1,3,R or 2,4,R or 1,4,R I prefer to s
Electronics Forum | Sat Mar 24 12:30:20 EDT 2007 | John B.
We're currently running a manncorp ECM-93, which has served us alright, but we've pretty much outgrown it. We manufacture power electronics, a lot of double sided designs with odd form parts. We have about 30 different designs we manufacture, and we
Electronics Forum | Thu Oct 04 00:01:59 EDT 2018 | gaintstar
Flason SMT FUJI Pick and Place Machine: http://www.flason-smt.com/product/FUJI-Chip-Mounter-SMT-spare-parts-A10395-Fiber-Amplifier.html http://www.flason-smt.com/product/FUJI-Chip-Mounter-SMT-spare-parts-Amplifier-A1038t.html http://www.flason-smt.co
Electronics Forum | Tue May 19 13:54:17 EDT 1998 | Dave F
| I am interested to buy some Yamaha feeders! | 8mm, 16mm and 24mm for Hyper series YM-84II. | Can You help? | | The thread on GSM's inspired this: We have a tough time making the trade-off on GSM's work. The next option we like is the Philips (Ya
A dealer of high quality Used SMT Equipment, Used Plastic Injection Molding Equipment, Used Machine Tools, Used Semiconductor Machinery, and Used Industrial Machinery.
Equipment Dealer / Broker / Auctions
104 East Street
Middleton, MA USA
Phone: 978 790-2774
winsouce.jpg)
