Electronics Forum | Fri Feb 01 07:21:32 EST 2019 | dfl
One of my 8mm feeders is blinking the red led after the pick-up. With both buttons the motor works as expected (forward/backward), but after the nozzle pick-up the motor moves forward and then the red led blinks. pressing the buttons the green led l
Electronics Forum | Fri Nov 06 20:43:58 EST 2020 | jmelson
Does anyone have schematics for the PC board inside a Quad IQ feeder? I have one that worked a few days ago, but now gives me blinking lights and doesn't move. Or, do you know what to do when it won't move? I have checked the contacts and the feeder
Electronics Forum | Fri Nov 13 19:37:31 EST 2020 | jmelson
Yup, that's the first thing I looked at, the pogo-pin block on the front, and where the motor plugs in. Both could be stress points. I will try resoldering those anyway, although they looked fine. I examined the rest of the board, too, and could n
Electronics Forum | Mon Mar 22 00:17:41 EST 2004 | D. Sanders
Alan, Fuji also has a standard motor feeder FMB-44 that should handle this component (believe the depth is right at 17mm for the feeder). This is the motorized feeder, not the old mechanical ones that they use to sell. D.
Electronics Forum | Thu Jan 21 02:26:30 EST 2021 | baldoino
I would like to sell used pick and place feeders for Siplace. How can I offer them (70 x 8mm; 20 x 12/16; 05 x 24mm.
Electronics Forum | Thu Mar 04 22:37:58 EST 1999 | Larry Johnson
Does anyone out there have any information on this new "Fuji Motor Feeder" Price and how it compares to Hover-Davis. I should specify feeders for an Fuji IP-3. Any information would be great. Thanks Larry
Electronics Forum | Mon Mar 08 11:54:38 EST 1999 | Bob Schuster
| Does anyone out there have any information on this new "Fuji Motor Feeder" Price and how it compares to Hover-Davis. I should specify feeders for an Fuji IP-3. Any information would be great. Thanks Larry |
Electronics Forum | Thu Jun 01 16:46:40 EDT 2023 | assuredtech
We have the following Samsung CP20 spare parts and feeders available, we also have CP40 - CP45 spare parts and feeders available - please inquire. 1.) Fine Suntronix MRK OR4-H Power Supply 24V 16 Amp Output 2.) Y Axis Service AmplifierSanyo Denki PY0
Electronics Forum | Fri Nov 30 11:04:23 EST 2007 | slthomas
Sounds like Mydata might be one you could look at, for example. I don't have experience with them but they do have "smart" feeder capability. Some machines use electronically controlled and motor driven feeders, some use pneumatic and/or mechanicall
Electronics Forum | Fri Mar 08 05:44:40 EST 2019 | bukas
are you sure #1 and #6 are interchangeable? if I remember correctly there is a catch with those motors, like there are 2 groups, group 1 being #1 #3 #5 and group 2 being #2 #4 and #6. maybe try getting it back and swapping cables at drivers for head
.gif)
