Electronics Forum | Thu Mar 30 14:00:32 EST 2006 | jdengler
Hi Bert, There should be an action occuring when the machine hangs-up(ie: Q motor rotating, getting ready to change nozzle, or other action). See if you can find this. The first thing that comes to mind is a loss of the signal for a nozzle in the
Electronics Forum | Mon Oct 31 02:41:34 EDT 2011 | kenmar
Yes removing the accuracy stops the problem but than we have pickup/placement problems especially on I.cs I cannot switch over the cards since there is only one 3A card in the machine and I think it is unique. Thanks
Electronics Forum | Tue Jan 17 11:48:38 EST 2023 | eurolan
Hi, Thanks for your reply. This machine actually doesnt have such a button. It can home itself, but it tries to through the whole process, and stops when trying to find Z6 zero point.
Electronics Forum | Tue Sep 01 10:55:41 EDT 2015 | emeto
Hi, 1. Take a multi meter and measure the voltage - I assume it is a DC motor(probably 24V). If you don't, check power supply,cable, relays and Driver for the motor. If you do have voltage, check sensors(sometimes sensor activated may stop your con
Electronics Forum | Mon Aug 31 15:21:04 EDT 2015 | zombee
Dear Users! I have a Topaz pick&place machine, but the conveyor motor is not working. 1st test - production: Start production in "operation" menu: if I put the PCB the entrace of machine, the assembly head-bank picks up the first 8 components (prec
Electronics Forum | Wed Aug 31 07:40:58 EDT 2016 | bukas
BIOS stopped loading, now when I start machine monitor doesn't receive any signal. tried to start machine with different hard drive but nothing
Electronics Forum | Mon Mar 08 17:34:10 EST 2004 | pdeuel
Differant machines have differant types of control. smoe use pulse motors with encoders and are controlled by PMD pulse motor drivers. Most of these will have parameters to determine things such as fast over shoot, speed for certian tools and varati
Electronics Forum | Thu Aug 17 13:55:45 EDT 2023 | markhoch
I think we need more information. Is it moving at all? Does it move to a reference position and then stop before returning to the home position? Have you verified that all sensors are working correctly? Does the machine use stepper motors, motors & e
Electronics Forum | Thu Jun 01 16:46:40 EDT 2023 | assuredtech
We have the following Samsung CP20 spare parts and feeders available, we also have CP40 - CP45 spare parts and feeders available - please inquire. 1.) Fine Suntronix MRK OR4-H Power Supply 24V 16 Amp Output 2.) Y Axis Service AmplifierSanyo Denki PY0
Electronics Forum | Thu Feb 06 20:23:35 EST 2020 | bilalfarooqi
Hey everyone, We use a MyData MY12 machine and we are experiencing a problem with the Midas head. I recently replaced a torn vacuum tube that goes on the zfib card. The machine worked perfectly for a day and a half but now MY12 has completely stoppe
.gif)
