Electronics Forum | Wed Apr 15 21:55:45 EDT 2015 | cspasol
Anyone know where can I find SF-820-LF reflow Hood (Electric Actuator cylinder)? Name: Controller Power Supple Input Voltage: 110V-220VAC Output Voltage:24VDC 50VA Type of Daty: 10%-50% We urgently need this part. Thank you for reply.
Electronics Forum | Thu Apr 16 06:06:07 EDT 2015 | cspasol
Yes it is a 24 linear Actuator. Specs that can be seen on the part are: Name: Controller Power Supple Input Voltage: 110V-220VAC Output Voltage:24VDC 50VA Type of Daty: 10%-50% It is a chinese brand. Maybe there could have anyone with same specs
Electronics Forum | Mon Jul 19 19:39:06 EDT 2004 | KEN
I once had a forced convection oven (insert brand here)...and the top 220VAC heater (reflow zone) had shorted to the frame ground, blowing the branch line fuses. THe machine had no idea the heater was out because the lower heater was heating the upp
Electronics Forum | Wed Aug 07 16:56:32 EDT 2013 | marcelorotofrance
When I turn the machine on, almost every time I turn the Motor Power Switch it trips. I must to put the lever down and raise it again, then every runs normally. I asked to the former owner about that and told me that this machine always did it so and
Electronics Forum | Mon Sep 28 12:52:56 EDT 2009 | markhoch
I'm not familiar with this particular MPM model, but in my experience, most MPM's are Computer Controlled. There should be a CPU embedded somewhere within the machine. Check to see if it's getting power. (I'm assuming you're already checked fuses/cir
| 1 |
.gif)
winsouce.jpg)