Electronics Forum | Wed May 08 10:05:42 EDT 2002 | Claude_Couture
Maybe the problem is not the cutter, but the arm that advance the tape in the adjacent feeder gets actuated at the same time as the active feeder. line-up a feeder in pickup position visually, then turn the crank until the roller or feeder advance me
Electronics Forum | Wed May 08 09:49:17 EDT 2002 | Hussman69
Hello, We are experiencing a little problem of cutting feeder tape. When ever we place two or more 24 mm feeders together, the cutter on the machine will partialy cut the adjoining tape, or pull it out of sequence. The machine is a Panasonic MSR,
Electronics Forum | Mon Feb 14 17:36:37 EST 2005 | griinder
WE ARE USING MIRAE MX240. ON THIS MACHINE, THE FEEDER ADVANCE AND THE FEEDER PITCH IS CONTROLLED BY THE MACHINE/SOFTWARE AS OPPOSED TO THE FEEDER ITSELF. OUR SELECTIONS FOR 24MM FDDERS ARE 4,8,12, 16, AND 24MM.I WAS WONDERING IF THE 20MM PITCH WAS UN
Electronics Forum | Mon Feb 14 13:25:52 EST 2005 | gregp
EIA-481 standard allows the maximum pitch on tape to be 4mm less than the tape width (12mm width and larger). So it is within the standard allowances. As for how common 20mm pitch on 24mm tape is I can not say. I am surprised a 24mm tape feeder ca
Electronics Forum | Tue Feb 15 04:07:17 EST 2005 | Rob
Yes we have come across 24x20, & we have a couple of feeders set up for it, & no it's not that common a part but you can't be the only Mirae user who has ever tried. What do Mirae have to say?
Electronics Forum | Tue Jan 24 10:39:45 EST 2006 | O.K.
Hello everybody ! I am looking for manuals or catalogs for different makes of feeders - fuji, siemens, gsm. does anybody know where to find it ? thanks in advance, any replies will be appreciated.
Electronics Forum | Tue Jan 24 21:48:22 EST 2006 | bigdaddysoy9
Universal has GSM feeder manuals in .PDF format on their website. http://www.uic.com/ You have to register to view them.
Electronics Forum | Mon Feb 14 14:46:42 EST 2005 | russ
We use Samsung and our 24mm feeders have 8,12,16,and 20mm pitch settings. I have found 20mm pitch quite common. My favorite is yhe 12 on 12 our feeders don't support that, we have to put them up on 16mm feeders our cycle them 3 times on a 4mm pitch
Electronics Forum | Sun Feb 13 14:22:17 EST 2005 | griinder
Has anyone ever ran into a 20mm pitch on a 24mm tape and reel. Our software doesnt have a setting for 20mm. we found a way around it, but i was curious as to how common this pitch is, and if other software or feeders have a 20mm setting.
