Electronics Forum | Tue Dec 19 14:25:30 EST 2006 | bigdaddysoy9
Thanks bfsteffen. I figured it out. You have to apply 24 VAC to the bottom 2 pins.
Electronics Forum | Wed Mar 15 21:22:46 EST 2006 | bigdaddysoy9
The PILZ card, which is in the AC chassis, governs the safety circuit. Check for 24VAC going into the PILZ and 24VDC coming out.
Electronics Forum | Thu Oct 25 19:53:42 EDT 2012 | sonavc
Thank It worked without the user name and password.When I try to zero axis I have other error unable write to global memory 5008. My machine, when turn it on i don't see the power to the Digiplan 8 axis modular and no bright on 24VAC on at servo co
Electronics Forum | Wed Dec 23 12:53:59 EST 2020 | ttheis
Thanks for the detailed information. I have a spare dc/dc converter on order to try swapping them. Another note is all dc power is cut out by the pdp.ps1, not just 12vdc. 24vac power remains.
Electronics Forum | Wed Apr 28 15:23:47 EDT 2021 | procyon
Hello Deni, Thanks for the comment. Could you provide a bit more information as to what pins are used to accomplish this specifically for Universal Instruments Blue label older feeders? Here is the pinout I got from UI but it does not show a statu
Electronics Forum | Fri Sep 16 06:34:07 EDT 2005 | ajay
We have link fail issue now & could not able to establish. Overall situstion is that oven can not work. we checked all relay 24vac, 24vdc, 110v, 120v, 240v. all looks ok. only issue we ovserve that from B250SSR pin no 3&4 we are unable to get 5VDC. T
Electronics Forum | Tue Jun 23 08:08:38 EDT 2009 | ptxems
We have a couple of Zeva/Juki PM570L's. One machine has developed a fault with the z axis motor. It is continually 'buzzing', we have checked and there is 24VAC on it. Although even on the other machine there is AC voltage on the motor. We have sw
Electronics Forum | Wed Apr 28 15:18:17 EDT 2021 | dilogic
24V feeders are very simple to interface. You have supply voltages (24VAC, 12VDC), status output and control input (advance). All signals are using 12V levels. To advance feeder pull control input to GND. Connect status output to +12V with a pull-up
| 1 |
