Electronics Forum | Wed Oct 15 15:40:21 EDT 2008 | stepheniii
255 shuts it off, but if I remember correctly 254 still uses vision but passes almost everything? You might want to give 254 a try before resorting to 255. I believe 254 will still correct some pickup offsets. And iirc 255 isn't in the manual but so
Electronics Forum | Fri Oct 17 06:24:44 EDT 2008 | tegel
Hi, When you tried vision type 254, did you change the size of the body? On 254 the body size should be the outer dimension of a component, so on a PLCC (or any other component) the leads should be included in the body size as well. One other thing r
Electronics Forum | Mon Oct 24 09:07:58 EDT 2016 | robl
Could you make up your own adaptor cable to connect to your programmer, then fit a small form connector like a Firewire on the edge of the PCB? It should only take up about 7x7mm of real estate as opposed to a 2.54mm 5x2 pin header 12.7 x 5.08, or a
Electronics Forum | Sat Dec 16 13:25:49 EST 2000 | Roland
And wouldn't you like SMTnet to link to that information? Let's make it happen Cal!
Electronics Forum | Mon Dec 18 13:28:16 EST 2000 | Earl Moon
Possibly the single most important posting on this site - ever. Earl Moon
Electronics Forum | Tue Jul 15 10:47:23 EDT 2008 | Emil
8+2cooling) paste Aim NC254 Thanks in advance!
Electronics Forum | Tue Jan 02 02:30:18 EST 2007 | _____
Ahh yes, 254. Don't give up on the other vision types. 254 can give you skewing as well. Your width and height are awfull close. Even with the 0.5 tolerance it is using the tolerance and saying that it is OKAY. Maybe what you measure is 1.8mm for wit
Electronics Forum | Sat Dec 16 10:12:57 EST 2000 | Dave F
Now, that you have your chompers in place and the coffee cleaned from your screen, aren't you going to tell us about the research reports that EMPF produces that provide the information for those people that write some of the articles in our trade j
Electronics Forum | Wed Nov 24 06:38:57 EST 1999 | carl
Hi Larry; Have you tried just to place it as a square. Or if all fails try vision 254 255. Just be carefull with this as it will place nothing if the reel runs out. Give me a call.
