Electronics Forum: 265gsx (Page 1 of 19)

DEK 265gsx vision calibration

Electronics Forum | Sat Mar 27 23:03:21 EDT 2010 | dman97

Well I'll be damned! I was printing this on the fiducial side. Silly me. I should have read the manual closer. Thanks for the help.

DEK 265gsx vision calibration

Electronics Forum | Sat Mar 27 23:44:16 EDT 2010 | dekhead

You were doing it right... for a 288. 3rd or 4th time in the last year or so I've had somebody do that. Glad I could help. http://www.dekhead.com

DEK 265gsx vision calibration

Electronics Forum | Thu Apr 01 23:53:26 EDT 2010 | dekhead

Sounds like SPC data collection is turned on with post print alignment inspection. Needs to be changed to "NONE" http://www.dekhead.com

DEK 265gsx vision calibration

Electronics Forum | Sat Apr 03 14:17:26 EDT 2010 | dman97

Thanks again for your help. I never would have guessed to check the SPC data settings because we never use it. Thanks so much!

DEK 265gsx vision calibration

Electronics Forum | Thu Apr 01 18:13:19 EDT 2010 | dman97

Since my last post, I have successfully calibrated my printer. Now I have noticed that after a print, the machine decides to check for fiducials again. A post print fiducial check. Do you know how to disable this? It is slowing down my process co

DEK 265gsx vision calibration

Electronics Forum | Fri Mar 26 21:48:56 EDT 2010 | dman97

Can someone explain to me what I'm supposed to do after I have done the vision offset calibration procedure? The manual tells me to put solder paste down on all 25 holes of the stencil. After this the board drops down and the machine scans each fidu

DEK 265gsx vision calibration

Electronics Forum | Fri Mar 26 23:07:07 EDT 2010 | dekhead

Just a guess: Are you printing your fiducials on the fiducial side of the board? Fidicial Side is for Vision Calibration, Bare Copper Side is for Offset Calibration (Step 5 of procedure says "copper side uppermost"). After printing 25 fiducials o

Dek 265 GSX password?

Electronics Forum | Sat Dec 06 00:43:22 EST 2008 | dman97

Thanks for all the replies. I figured it out. The password was 265 gsx.

DEK 265 GSX

Electronics Forum | Thu Aug 23 09:44:09 EDT 2018 | midware

Hi. Please help. On DEK 265 GSX i've got on the monitor message: "DEK 265 GSX Motor comms failure, card 1, axis 123 fatal error." F1-F8 doesn't work, machine cant start. No result after Reinitialise machine. Which one is this card1? Is it in PC?

DEK 265GSX HOOD OPEN ERROR

Electronics Forum | Mon Sep 20 13:55:37 EDT 2010 | jamyboy

Check to make sure that the front and back of the DEK265GSX covers are closed. I have seen issues where the back cover trips its interlock and people go other places to look for the problem.....hope this helps

  1 2 3 4 5 6 7 8 9 10 Next

265gsx searches for Companies, Equipment, Machines, Suppliers & Information