Electronics Forum | Fri Mar 09 01:48:26 EST 2018 | aemery
Unfortunately Gerber EZ is probably the one thing I know very little about. As an FSE with Speedline I only had one client at that time that was using it and an application engineer came in and helped them with it. Sorry I can't give a direct answer
Electronics Forum | Wed Mar 07 13:58:06 EST 2018 | griinder
We are using Gerber EZ Teach to inspect near 100% of some boards. Many component footprints seem to be assigned custom packages. These custom packages come up as "preview errors" during inspection. I have noticed when I manually move the camera to th
Electronics Forum | Thu Oct 05 21:14:08 EDT 2006 | chrisgriffin
I'm with Chunks on this. In my experience MPM's are very accurate and reliable. There are so many out there because people like them. You can make a program with 2D inspection in about 10 minutes. Things do sometimes break on the 3000's, but not
Electronics Forum | Wed Oct 10 15:09:27 EDT 2012 | trifith
Hi guys... I have both of them, but I prefer MPM. DEK is too problematic on our production. The biggest difference between them is in 2D inspection. Setting 2D inspection on DEK is a nightmare. MPM is really clever machine, what do what you tell him
Electronics Forum | Tue Nov 26 09:19:29 EST 2002 | pjc
MPM UltraPrint 2000 2D Inspection Times: QFP 256 pin 16Mil pitch is 7.5 seconds BGA 225 ball 20Mil pitch is 1.8 seconds Find out the DEK times for these devices. Any UP2000 of 1995 mfg. date oand on can be upgraded to the latest software. Concer
Electronics Forum | Mon Oct 01 17:04:02 EDT 2012 | dontfeedphils
I'm looking for some information or possibly some contact info on someone who could answer this question for me. I'm interested in how 2D post print inspection is done on the late model MPM Accuflex, and more importantly, if the programming can be d
Electronics Forum | Thu Oct 04 14:26:45 EDT 2012 | capse
hi, The 2D uses gray scale analysis to calculate area coverage of paste on the pad. Off-line programming was offered via CircuitCAM from Aegis.
Electronics Forum | Fri Mar 29 16:57:07 EDT 2013 | aemery
Gentlemen, Just became a member and scanning the old posts hoping to help people out with their MPM printers. Most of this info is correct, the last post was the best. Offsets on an Accuflex printer can be put in either per process program or glob
Electronics Forum | Fri Sep 30 09:41:51 EDT 2005 | CEB
I have worked on DEK machines for over 11 yrs, I have implemented the 2D system and have not had any luck with the system. DEK is offering new software if you are interested in possibly upgrade the machine. The new system is the Hawkeye vision and it
Electronics Forum | Mon Oct 06 15:41:10 EDT 2003 | SMT Process
To upgrade to version 8(VERY recommended), there are 4 different upgrades that can get you there depending on what rev of camera and firmware you have, and whether you want to add 2D functionality. If you don't already have 2D, I would recommend doin
Our Company handle AOI (Auto Optical Inspection) and SPI (Solder Paste Inspection) Machines.
Equipment Dealer / Broker / Auctions
Hwaseong-si, Gyeonggi-do, Korea
Hwaseong-si, South Korea
Phone: +82-1029254936
