Electronics Forum | Mon Jan 28 12:09:27 EST 2002 | billschreiber
Hello Carl, Smart Sonic has introduced the Assembly Module for off line programming of assembly equipment such as GPD. You can see it on the Smart Sonic website: http://www.smartsonic.com Click on the AOI/StencilScan and GlueScan link. If you hav
Electronics Forum | Mon Jan 28 17:34:32 EST 2002 | PeteC
The product mentioned by SmartSonic (stencil cleaner maker) is from ScanCAD International. See http://www.scancad.com
Electronics Forum | Tue Feb 26 09:32:56 EST 2013 | anton99
Update: We have bought more reels to cover both lines and it has helped enormously. There were about 100 part numbers that were used on both lines over 300 times per year. The majority of them were less than $20.00 a reel. We have also been using My
Electronics Forum | Mon Apr 17 04:25:38 EDT 2006 | TA
Hi , Does any one has eperience on SAKI's ( Japan ) AOI m/c. They use Line Scan technology and claim to have the fastest. regards
Electronics Forum | Wed Jan 29 03:11:18 EST 2020 | tamasmagyar
Barcode/scanner configuration can still lead to wrong parts mostly when changing reels. The root cause is still the line operator, because instead of scanning the newly set-up reel, he/she scans the old reel because 'it's easier' for them. I have wor
Electronics Forum | Mon Apr 20 23:56:47 EDT 2020 | SMTA-Samy
After I create the pick & place program on the pick and place machine (Assembléon, recently aquired by kulicke and soffa), we generate setup sheets for the operator which lists what component goes into what feeder. Upon loading a tape & reel in the f
Electronics Forum | Mon Feb 03 13:30:16 EST 2020 | scotceltic
Check into Bartector. Used this solution for 15 years at a previous employer. As long as your parts are labeled correctly (correct part number matching the mfg part number) then Bartector will have the operator scan the feeder to the part label. I
Electronics Forum | Tue Jan 28 12:32:44 EST 2020 | jede
We have had a few large human error, wrong placement in the SMT set up over the past year(same package size placed in the wrong feeder position to where it goes unnoticed) and we are trying to look for possible process improvements to prevent this fr
Electronics Forum | Wed Jan 23 15:33:34 EST 2008 | vance66
I am looking to scan small 2D barcodes in-line while the circuit board is on a conveyor. Currently an operator is picking board up off the conveyor to scan them. We want something that is fixed and does not need to much manual alignment from changeo
Electronics Forum | Wed Apr 21 17:34:48 EDT 2010 | stepheniii
Does it have to be one for both 1D and 2D? We scan barcodes we print with a 200 DPI printer which works out to 5 mil wide lines with no problem. 2D barcodes need a completely different kind of scanner. I know there are scanners that can do both but
SCANSMT is local stocking dealer who major in SAMSUNG,PANASONIC,YAMAHA,JUKI,FUJI mounter and MIRTEC,KOHYOUNG,PARMI,PEMTRON,CYBEROPTICS AOI&SPI,MPM,SJ,ESE Printers.HELLER,TSM Reflows are always have invertonries.welcome to visit us
Training Provider / Manufacturer / Equipment Dealer / Broker / Auctions / Consultant / Service Provider
Floor 1,D Building,B area,Dongsheng Techwin Park,Bao'an District
Shenzhen, 30 China
Phone: 008618566662725
