Electronics Forum | Fri Mar 09 01:48:26 EST 2018 | aemery
Unfortunately Gerber EZ is probably the one thing I know very little about. As an FSE with Speedline I only had one client at that time that was using it and an application engineer came in and helped them with it. Sorry I can't give a direct answer
Electronics Forum | Thu Apr 26 01:14:42 EDT 2007 | JJ
Hi all, We plan to buy solder paste height measurement machine. However, not sure which is the better one..2D or 3D? As far as I know,3D is quite slow and but more accurate in term of measurement result. Pls share with me if anyone who has this e
Electronics Forum | Thu Apr 26 09:03:35 EDT 2007 | ck_the_flip
3d is good for initial verification that your screen printer and stencil is producing the desired paste height. 2D verification is more than sufficient during regular production. That being said, your best bet for a 3D machine is to go cheap - buy
Electronics Forum | Sun Nov 08 10:22:52 EST 2009 | doremi
Hi everybody, First of all, to have process under 100% control you should have AOI after every active process in the pcb assembly line : - Post printing (2D or 3D Solder paste inspection machine); - Post reflow; - Post selective(wave solder). It i
Electronics Forum | Thu Apr 26 10:07:06 EDT 2007 | realchunks
Hi Dub J, I have worked for a few companies that did 3D sampling and found the data they produce to be useless. In the real world they are slow, so that means you won't sample every board. Now if you're not sampling every board, and you start to r
Electronics Forum | Thu Apr 26 01:42:56 EDT 2007 | Haris
Hi, yes may be 3d is slow but it gives you great results as it shows the height while 2d picture shows error when the paste in your machine appears to end i.e. when it see that the pad starts to appear. I don't know which company brand you prefer but
Electronics Forum | Thu Nov 05 00:11:11 EST 2009 | shinseimy
Hi, You might be can consider try our brand AOI checker. We are the manufacturer the AOI which located at Malaysia. The programming is very easy to use, and effective on the speed. Furthermore, 2D barcode reader, NG marking included. If you are inte
Electronics Forum | Thu Apr 26 19:06:08 EDT 2007 | grayman
In short this guys are not well updated on the new technology of SPI. True, 3D IN LINE SPI is no longer a slow machine. Try checking some brand like Cyberoptics,Synapse imaging,SEIMENS,KOHYOUNG and many others...they can match the speed os some mount
Electronics Forum | Mon Jul 01 12:37:38 EDT 2013 | tpost
I do have access to an X-ray but it is only 2-D and it just appears as a black solder joint, not to impressive.. The main question though if it is a reowked solder joint does it still need to show wetting on the lead or can it be covered with solder
Electronics Forum | Thu Aug 12 05:33:23 EDT 1999 | Brian
| | (snip) | | | | You're quite right. However, anyone who uses MeCl in an aerosol spray needs his head examining. I'll go further: if he continues, he will most CERTAINLY need his head, the rest of his CNS and his liver examining a little later on
winsouce.jpg)
