Electronics Forum | Fri Feb 28 15:27:50 EST 2014 | tombstonesmt
Good afternoon! Looking to see what everyone else in the industry is running for print speeds regarding type 3 solder pastes. Our paste is a type 3 with 11.5% ROL0 flux content. The finest pitch component in our case is .5mm pitch. Our screen print
Electronics Forum | Wed Aug 23 22:31:06 EDT 2006 | Derek
I have an ongoing problem with a Panasonic HDP3. When the machine is switched on, the screens flicker for a while and then it eventually starts the boot up sequence, but resets itself. Each time it starts the boot up sequence it gets a bit further. A
Electronics Forum | Wed Sep 19 12:19:36 EDT 2007 | miguerre
Hi, We are lookin for somebody that would be able to repair a Sikama reflow soldering system model Falcon 3. The unit does not heat up, and the track stopped working as well. The machine is from year 1987 and the serial# 87-06-030 Also, if you hav
Electronics Forum | Wed Apr 06 12:25:47 EDT 2005 | Rob.
Hi Russ, Thanks for that. The oven was being recommended to a customer of ours who is a subby, so will have to handle many different types of boards & components. I was thinking this wasn't too great an idea but thought I'd go for a second opinion
Electronics Forum | Mon Jun 26 04:41:06 EDT 2006 | dallen
Thanks for all the responses. BTU has now informed that the reason it is so expensive is the oven heaters need completely rewiring and some work in the transformer area etc is required. Also, we have to pay for engineering work for them to know wha
Electronics Forum | Tue Apr 05 08:18:39 EDT 2005 | Rob
Hi, I don't know if I'm being naive, but I'm seeing a number of 3 zone (+1 cooling) ovens on the market that claim to be for Lead Free soldering. Trying to follow component & solder manufacturers ideal profile can be tricky with 7 zones at times so
Electronics Forum | Wed Jun 21 16:30:07 EDT 2006 | GS
Hi Dallen, I do not know BTU VIP70 oven, any way make sure if it is not yet wired for 480 V 3Ph (wiring diagram), may be it needs just to reset wiring on terminal block in order to run at 480V. Best if you ask BTU. If not, you have to buy a Transfo
Electronics Forum | Mon Mar 03 15:44:56 EST 2014 | emeto
with 0.5mm pitch I wouldn't go too fast. Check your separation speed as well as your print area(may be you can drive your squeegees 1-2 inches less). Some pastes like Alpha like very fast separation. so you can win another 2-3 seconds from there.What
Electronics Forum | Mon Feb 21 17:56:44 EST 2005 | davef
You want approximately 5 particles minimum across the smallest aperture. So in the case of a 0.8mm device, we use .017" pads with a round 0.020" aperture on a 6 thou thick stencil foils. Here, 0.020" diameter equals 0.50mm. This gives us 0.50/5=10
Electronics Forum | Mon Jun 26 03:56:44 EDT 2006 | slaine
hi I had a hunt round this morning and found all the schematic drawings for the vip70. Have you got a copy of them? where abouts in the uk are you im in Cumbria. drawing 5061617 appears to show some different wiring configerations, but im not sure if
Nordson Electronics Solutions makes reliable electronics an everyday reality. Our ASYMTEK, MARCH, and SELECT brands deliver precision fluid dispensing, conformal coating, plasma treatment and selective soldering equipment.
2747 Loker Ave West
Carlsbad, CA USA
Phone: 18002796835
winsouce.jpg)
