Electronics Forum | Wed Jun 16 16:49:16 EDT 2010 | nguyennca
I have an error that stop FIP 3 from running. The error is "FIP OSS2 R3.1Bi CRTA event I/O. If anyone knows what this error is about then please help. Thanks
Electronics Forum | Sat Nov 07 13:29:12 EST 2015 | jimmyboz
The machine will allow more functions other then > power off, forgot to press reset button. Any one > know what ESC 3 means? Promise me 3 peanuts and a book of matches, and i will try to find out. I mean, are you still having the problem?
Electronics Forum | Thu May 25 08:18:19 EDT 2000 | Mulitze
Has anyone experience in placing Flip-Chips (Pad-Size: 120x120um) with an Siplace F 3?
Electronics Forum | Thu Nov 09 20:01:12 EST 2006 | AB
What are the pros and cons between type 3 and type 4 no clean solder paste (SnPb)?
Electronics Forum | Fri Oct 23 10:40:29 EDT 2015 | kurtiss
The machine will allow more functions other then power off, forgot to press reset button. Any one know what ESC 3 means?
Electronics Forum | Sat Nov 07 13:32:50 EST 2015 | jimmyboz
Oh, IP2, holder 3 is not making the sensor that confirms it is up far enough for the X2 to move. It may even be just timing.
Electronics Forum | Fri Nov 08 17:10:04 EST 2002 | rspoerri
Is that square inscribed or circumscribed with respect to the pad? It sounds like you're saying circumscribed (overprint) given the volume comment. Wanted to confirm though. Kim
Electronics Forum | Fri Nov 08 17:20:52 EST 2002 | davef
You need to get as much paste on the board as you can get. A BIG opening gives: * Better release. * More paste. You may be able to cheat further by rotating the square so that it is on the diagonal.
Electronics Forum | Tue May 27 17:09:46 EDT 2003 | davef
J-STD-001C, Table 11-1 is a good starting point.
Electronics Forum | Sat Nov 11 07:54:53 EST 2006 | davef
Many use the following guideline when judging the proper paste for a stencil aperature: You want approximately 5 particles minimum across the smallest aperture.
Nordson Electronics Solutions makes reliable electronics an everyday reality. Our ASYMTEK, MARCH, and SELECT brands deliver precision fluid dispensing, conformal coating, plasma treatment and selective soldering equipment.
2747 Loker Ave West
Carlsbad, CA USA
Phone: 18002796835