Electronics Forum | Thu May 09 16:04:07 EDT 2002 | stownsend
The lighter the component, the more likely it is to stick to the solder on the bottom reflow side. All boards I have worked with, the descrete components (R's and C's) are placed first (bottom side), reflowed, then the active components (IC's) are pl
Electronics Forum | Fri Feb 18 13:15:10 EST 2005 | need help
we are having problem with the flipchip sticking to the tape and reel cover, jumping around the tape pockets, and double stacking at placement during production. Does anybody else have this problem? Does anybody have a solution.
Electronics Forum | Wed May 30 10:35:54 EDT 2001 | traviss
Do you have vacuum on your printer? I guess not or you wouldn�t be asking. Can you get vacuum? If not you could use double sided tape, I am always amazed how many times it can stick before it needs replaced.
Electronics Forum | Tue Dec 21 04:06:31 EST 1999 | Wolfgang Busko
Hi Edmund, if it is a 0603 chip there�s obviously something wrong either with your pads or the component itself. We do such things with vapourphase and do not have the possibility of adjusting the profile for bottomside and they still stick to the b
Electronics Forum | Thu Apr 07 14:31:08 EDT 2022 | SMTA-69080803
I'm looking for a double-sided adhesive solution: 1. Strong or permanent adhesion on one side, temporary adhesion on the other side. 2. Can withstand high temperature (lead-free oven reflow) I'm trying to temporarily stick material on a panel using
Electronics Forum | Tue Feb 20 18:04:53 EST 2007 | coop
I am not familiar with the YV100XG pick & place but you might want to increase the mount height of these components The double stick tape isn't as thick solder paste. it might be pushing the component too far down causing it to twist. I encountered
Electronics Forum | Fri Aug 17 17:55:42 EDT 2007 | htran
My small reflow oven doesn't have the rails (only metal mesh). I personally don't think it was built for double side reflow assembly and there is vibration as well. We are a small low volume mfg house and our reflow oven doesn't have the capability t
Electronics Forum | Tue Jun 24 12:59:24 EDT 2014 | cyber_wolf
I agree with AVFM. We have had at least 5 TP machines and a MY12. We stick carrier tape to scrap circuit boards with double sided tape. Teach it as a tray. Works perfect. The Count On strip feeder looks cool but is no necessary in my opinion.
Electronics Forum | Sun Oct 15 20:09:42 EDT 2000 | mech9t9
Does anyone out there use the DEK FormFlex? I am looking to find out the advantages/disadvantages of using it. Also, are there any problems that you have come across with the FormFlex (pin sticking)? Does the FormFlex reduce setup time drastically? C
Electronics Forum | Sat Oct 14 19:49:05 EDT 2000 | mech9t9
Does anyone out there use the DEK FormFlex? I am looking to find out the advantages/disadvantages of using it. Also, are there any problems that you have come across with the FormFlex (pin sticking)? Does the FormFlex reduce setup time drastically
